There was a script written by 3DSP a few years back to substitute callsigns for node numbers and I tried it but its looking for a file astdb.txt which doesn't exist. Anybody know of a way to do this that works? GeorgeC W2DB --- This email has been checked for viruses by AVG. https://www.avg.com
look in /var/www/html/allmon/ ...mike/kb8jnm On 1/21/2019 11:53 PM, George Csahanin wrote:
There was a script written by 3DSP a few years back to substitute callsigns for node numbers and I tried it but its looking for a file astdb.txt which doesn't exist.
Anybody know of a way to do this that works?
GeorgeC W2DB
--- This email has been checked for viruses by AVG. https://www.avg.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
How does that work if you have more than one node? 73 N2DYN Angelo -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Tuesday, January 22, 2019 12:17 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] callsigns instead of node numbers look in /var/www/html/allmon/ ...mike/kb8jnm On 1/21/2019 11:53 PM, George Csahanin wrote:
There was a script written by 3DSP a few years back to substitute callsigns for node numbers and I tried it but its looking for a file astdb.txt which doesn't exist.
Anybody know of a way to do this that works?
GeorgeC W2DB
--- This email has been checked for viruses by AVG. https://www.avg.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Angelo, It only announces the callsigns connects on your local (modified) node. Any other Node would still indicate node numbers on their end unless they also have modified their node to change from numbers to callsign. If you own more than one node its number would be replaced by the callsign matching the data in the astdb.txt file. Using another of your own nodes to connect to yourself (after modification) would say your callsign connected to your callsign...on the modified node but still announce number to number connects if your other node is not modified. Larry - N7FM On 1/22/19 7:45 AM, Angelo T Sonnesso wrote:
How does that work if you have more than one node?
73 N2DYN Angelo
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Tuesday, January 22, 2019 12:17 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] callsigns instead of node numbers
look in /var/www/html/allmon/
...mike/kb8jnm
On 1/21/2019 11:53 PM, George Csahanin wrote:
There was a script written by 3DSP a few years back to substitute callsigns for node numbers and I tried it but its looking for a file astdb.txt which doesn't exist.
Anybody know of a way to do this that works?
GeorgeC W2DB
--- This email has been checked for viruses by AVG. https://www.avg.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
How does that work if you have more than one node?
73 N2DYN Angelo
-----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Tuesday, January 22, 2019 12:17 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] callsigns instead of node numbers
look in /var/www/html/allmon/
...mike/kb8jnm
On 1/21/2019 11:53 PM, George Csahanin wrote:
There was a script written by 3DSP a few years back to substitute callsigns for node numbers and I tried it but its looking for a file astdb.txt which doesn't exist.
Anybody know of a way to do this that works?
GeorgeC W2DB
--- This email has been checked for viruses by AVG. https://www.avg.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to
Thanks, I appreciate the information. 73 N2DYN Angelo -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of larry Sent: Tuesday, January 22, 2019 12:57 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] callsigns instead of node numbers Angelo, It only announces the callsigns connects on your local (modified) node. Any other Node would still indicate node numbers on their end unless they also have modified their node to change from numbers to callsign. If you own more than one node its number would be replaced by the callsign matching the data in the astdb.txt file. Using another of your own nodes to connect to yourself (after modification) would say your callsign connected to your callsign...on the modified node but still announce number to number connects if your other node is not modified. Larry - N7FM On 1/22/19 7:45 AM, Angelo T Sonnesso wrote: the "Unsubscribe or edit options button" the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Angelo T Sonnesso -
George Csahanin -
larry -
Mike