Static ip

4 Apr 2014

      Simply put. At the root prompt type
setup
Goto device configuration. Remove the asterisk in dhcp and assign your
static info.

Save and exit.

Service network restart or reboot to reload.

KB3ORS-Brian
On Apr 4, 2014 5:03 PM, <app_rpt-users-request@ohnosec.org> wrote:
...
Send App_rpt-users mailing list submissions to
        app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit
        http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
        app_rpt-users-request@ohnosec.org
You can reach the person managing the list at
        app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Moving ACID from dynamic to static IP (Bob)
   2. Re: Moving ACID from dynamic to static IP (Doug Crompton)
   3. Re: Moving ACID from dynamic to static IP (Jim Duuuude)
----------------------------------------------------------------------
Message: 1
Date: Fri, 4 Apr 2014 13:18:52 -0700
From: "Bob" <kk6ecm@gmail.com>
To: <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Moving ACID from dynamic to static IP
Message-ID: <5AC934371D9A49E7A54F5A97DB1C91B3@ThePykesHP>
Content-Type: text/plain; charset="us-ascii"
I can use some help... I want to move an Allstar ACID server from dynamic
to
static IP without a complete reinstall... It seemed to use a script during
install (I typed "N" at the time), which I am attempting to locate, or the
config file with an example. I've been looking through
/etc/sysconfig/networkscripts and found ifcfg-eth0, which says,
DEVICE=eth0
BOOTPROTO=dhcp
DHCPCLASS=
HWADDR=54:04:A6:EB:BF:90
ONBOOT=yes
DHCP_HOSTNAME=<server name>
Can I modify this to:
DEVICE=eth0
BOOTPROTO=none
DHCPCLASS=
HWADDR=54:04:A6:EB:BF:90
ONBOOT=yes
DHCP_HOSTNAME=
NETWORK=xxx.yyy.zzz.0 ;basic network address?
NETMASK=255.255.255.0
IPADDR=xxx.yyy.zzz.27 ;static IP address
Am I missing anything? I will be at a remote site, so want to have it
correct before the move, and can't test it at the current location. Hope
this is not wishful thinking.
Thanks,
Bob
kk6ecm

Brian Burton

tags

participants (1)