There are many ways of doing the same thing. Each having their own implications. One method is using a 'start-up macro' to make the connection at startup from node3 to each of the other nodes in a permanent fashion. Using a assignment for this: (777 is our example assigned command for ilink,13) ???=ilink,11 – Disconnect a previously permanently connected link ???=ilink,12 – Permanently connect specified link — monitor only 777=ilink,13 ;Permanently connect specified link — transceive and running it in a startup macro for each of the other nodes you want a permanent connection. in rpt.conf startup_macro=*777(NodeNum),*777(NodeNum) ;Macro to run at startup (optional)(no # reqd) There are other ways of doing this. You will probably need to experiment to find what works best for your circumstances. ...mike/kb8jnm

Hi again,

Another "beginner" question : ;-) - I have two duplex repeaters (n° 1 and n° 2), on two separate mountains. Each one has app_rpt configured and running, alone. - I'd like to install a hub (n° 3) in the city, to connect repeaters 1 and 2 - the connection must be permanent : the audio of repeater 1 must be linked permanently to the audio on repeater 2

I read a lot of things, but I do not really understand what to do : - Do my repeaters 1 and 2 have to "register" (in iax.conf) to my hub 3, as ther would register to allstarlink.org ? If so, how should I declare the corersponding "server" in iax.conf on 3 ? - Do I need to declare 3 in the nodes stanza of 1, and 1 in the nodes stanza of 3 ? Or 1 in the nodes standa of 2, and 2 in the nodes stanza of 1 ? - How to make the connection between 1 and 2 (through 3) permanent ? (ie, without having to type DTMF commands to connect)

Thank you for this great piece of software ! But I think mastering it will require some time, HI :-)

73 de TK1BI _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.