What could cause the retransmitted audio to sound tinny. It sounds good when playing sound files, but retransmitted audio from the receiver sounds a bit tinny. The radio settings have not changed, just the computer with a new ACID load from the CD. Are there settings that need to be adjusted in the config files? What have I missed? Thanks, Bob kk6ecm Sent from iPad
Sorry for this being off the topic, but I am planning to head to Dayton, Oh for hamvention and was wondering if there are any allstar systems in the area?? 73 de Angelo
Not a perm one.... I install a uhf repeater/aprs igate in the arena.. its linked back to our 28236 hub.. 442.3500+ 107.2 pl.. -- Fredric Moses - W8FSM - WQOG498 fred@moses.bz On Tue, May 13, 2014 at 11:23 AM, Angelo Glorioso <n5uxt@hotmail.com> wrote:
Sorry for this being off the topic, but I am planning to head to Dayton, Oh for hamvention and was wondering if there are any allstar systems in the area??
73 de Angelo
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks for all that replied. I guess there really is not a node that close to Dayton. I really wanted to connect back home. Thanks again all, 73 de Angelo OFF TO DAYTON we go. ----- Original Message ----- From: Fredric Moses To: Angelo Glorioso Cc: app_rpt mailing list Sent: Tuesday, May 13, 2014 12:25 PM Subject: Re: [App_rpt-users] Dayton, Ohio Not a perm one.... I install a uhf repeater/aprs igate in the arena.. its linked back to our 28236 hub.. 442.3500+ 107.2 pl.. -- Fredric Moses - W8FSM - WQOG498 fred@moses.bz On Tue, May 13, 2014 at 11:23 AM, Angelo Glorioso <n5uxt@hotmail.com> wrote: Sorry for this being off the topic, but I am planning to head to Dayton, Oh for hamvention and was wondering if there are any allstar systems in the area?? 73 de Angelo _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Angelo, Where there may not be a permanent node up in the Dayton area, Kevin WJ7G will be hosting a mobile node in the north tailgate area in and around spaces 1960 & 1961. The planned frequency for this node is 442.000+ PL123.0. Please note this node will only be active during flea market hours. (Sorry, but it runs on a Verizon 4G LTE JetPack) Along similar lines, the RB gang will be in our usual spots of 2378-2380 and 2568-2570. These are 6 end of row spots, so we should be easy to find. I will have 14 newly minted RB-RIMs available for sale this year at the discounted show price of $90. These include mating connector and a high-quality 6' USB cable. I also have 10 more USB-RIMs that do NOT include a USB cable (damned UPS) that I will make available for sale at $85 each. More info on our RB-USB-RIM product can be found here: http://www.repeater-builder.com/products/usb-rim.html The latest weather forecast I saw called for nice weather and not too hot, so feel free to stop by and say "HI." Hope to see everyone there. Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531 On 5/14/2014 12:49 PM, Angelo Glorioso wrote:
*Thanks for all that replied. I guess there really is not a node that close to Dayton. I really wanted to connect back home.* ** *Thanks again all,* ** *73 de Angelo* ** *OFF TO DAYTON we go.* **
----- Original Message ----- *From:* Fredric Moses <mailto:fred@moses.bz> *To:* Angelo Glorioso <mailto:n5uxt@hotmail.com> *Cc:* app_rpt mailing list <mailto:app_rpt-users@ohnosec.org> *Sent:* Tuesday, May 13, 2014 12:25 PM *Subject:* Re: [App_rpt-users] Dayton, Ohio
Not a perm one.... I install a uhf repeater/aprs igate in the arena.. its linked back to our 28236 hub.. 442.3500+ 107.2 pl..
-- Fredric Moses - W8FSM - WQOG498 fred@moses.bz <mailto:fred@moses.bz>
On Tue, May 13, 2014 at 11:23 AM, Angelo Glorioso <n5uxt@hotmail.com <mailto:n5uxt@hotmail.com>> wrote:
Sorry for this being off the topic, but I am planning to head to Dayton, Oh for hamvention and was wondering if there are any allstar systems in the area??
73 de Angelo
_________________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/__mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/__mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 5/14/2014 5:14 PM, Scott Zimmerman wrote:
Angelo,
Where there may not be a permanent node up in the Dayton area, Kevin WJ7G will be hosting a mobile node in the north tailgate area in and around spaces 1960 & 1961. The planned frequency for this node is 442.000+ PL123.0. Please note this node will only be active during flea market hours. (Sorry, but it runs on a Verizon 4G LTE JetPack)
All, I'm sorry to report there wasn't enough room in the truck for the repeater - it won't be making the trip this year. Kevin
Scratch that... Found room under a seat. See you on 442.000! Kevin On 5/14/2014 10:34 PM, Kevin Custer wrote:
On 5/14/2014 5:14 PM, Scott Zimmerman wrote:
Angelo,
Where there may not be a permanent node up in the Dayton area, Kevin WJ7G will be hosting a mobile node in the north tailgate area in and around spaces 1960 & 1961. The planned frequency for this node is 442.000+ PL123.0. Please note this node will only be active during flea market hours. (Sorry, but it runs on a Verizon 4G LTE JetPack)
All,
I'm sorry to report there wasn't enough room in the truck for the repeater - it won't be making the trip this year.
Kevin
I have just finished setting up my tri-bridge + dstar and it will be at Dayton. Im not exactly sure where yet, but it will be nearby. Breakdown is as follows Mode Access Point Node number Freq Echolink KD2DMU-L 29785 145.600pl 151.4 D-Star Bridge XRF121 A 40857 145.600pl 151.4 Allstar Hub KC2IDB 40702 145.600pl 151.4 D-Star Local KD2DMU B XRF121 A 440.125 This is based in a mobile installation, D-Star and Allstar are both running only 5 watts. 73 Ken KC2IDB On Tue, 2014-05-13 at 10:23 -0500, Angelo Glorioso wrote:
Sorry for this being off the topic, but I am planning to head to Dayton, Oh for hamvention and was wondering if there are any allstar systems in the area??
73 de Angelo
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Just a heads up, the allstar node had to be moved to 145.630 as the other frequency was in use. Still has a tone of 151.4. During the evening the node will be in the area of the Drury Inn, and during the day it will be at the Hamvention. Enjoy 73, Ken KC2IDB On Thu, 2014-05-15 at 09:38 -0400, KC2IDB wrote:
I have just finished setting up my tri-bridge + dstar and it will be at Dayton. Im not exactly sure where yet, but it will be nearby. Breakdown is as follows
Mode Access Point Node number Freq Echolink KD2DMU-L 29785 145.600pl 151.4 D-Star Bridge XRF121 A 40857 145.600pl 151.4 Allstar Hub KC2IDB 40702 145.600pl 151.4 D-Star Local KD2DMU B XRF121 A 440.125
This is based in a mobile installation, D-Star and Allstar are both running only 5 watts.
73 Ken KC2IDB
On Tue, 2014-05-13 at 10:23 -0500, Angelo Glorioso wrote:
Sorry for this being off the topic, but I am planning to head to Dayton, Oh for hamvention and was wondering if there are any allstar systems in the area??
73 de Angelo
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (6)
-
Angelo Glorioso -
Fredric Moses -
KC2IDB -
Kevin Custer -
kk6ecm -
Scott Zimmerman