this may not help you 100% but you may be able to tweek it a bit. to completely kill all audio, put this in your rpt.conf under YOUR node stanza [2XXXX]   ;your node number notelemtx = yes   you can also use cop commands to turn telemetry ON or OFF using macros 'example below' (note)  this technique was explained in a previous archive first, assign two cop command, numeral 90 and 91, to reference cop 34 and cop 33 placing them under your functions stanza in the rpt.conf   [functions] 90=cop,34 ;local telemetry off 91=cop,33 ;local telemetry on   next, create macros to call on the cop commands using DTMF   [macro] 1=*90 ;this macro will turn off local telemetry 2=*91 ;this macro will turn on  local telemetry   DTMF execute *51  ;to turn off telemetry DTMF execute *52  ;turn on telemetry   if you want your node to start with telemetry off,  place this statement under your node stanza   [2XXXX] ;your node number startup_macro=*90   write a macro to connect to Wide Area Network telemetry disabled [macro] 3=*71*90*32135 4=*71*93 DTMF execute *53 ;connect to wide area network disable telemetry DTMF execute *54 ;disconnect wide area network re-enable telemetry   always restart node or rpt reload to take affect make sure you have 5=macro,1 under [functions] or this won't work make sure your not using 90 or 91 or macros 1 2 3 4 somewhere else   corrections gratefully accepted From: Geoff Edmonson <ars.w5omr@gmail.com> To: keith <keith@handscombe.co.uk> Cc: app_rpt-users@ohnosec.org Sent: Saturday, September 28, 2013 1:01 PM Subject: Re: [App_rpt-users] Mute Did any one else understand this? keith <keith@handscombe.co.uk> wrote: Evening all,   It's been a long time since I am sure I did this on my first node build. In the morning I connect to the Winsystem and my node then gets then connects and disconnects while this net is on. I would prefer to only get the first point that my node connect to and then disconnects from and have no other node reports in-between the actual net. I have removed the Echo link connection broadcasts to reduce but would like to reduce the All-Star connection broadcasts please.   Whomever helps thanks      Kind Regards      Keith Handscombe         _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users