I also wanted to mention that I am running the Debian pi2 image using usbradio that n4irs shared the link for and I have no issues with it at all. It just works! I don't have any audio delays at all with it using the usbradio setup. Sent from my iPhone

On Jul 28, 2015, at 12:34 PM, Steve Zingman <szingman@msgstor.com> wrote:

Ken, Yes, The RPi2 can be used as a low cost node to run a couple of radios / repeaters If you want to build it, rather then a 1 size fits all image, you can download the scripts you need from: <https://github.com/N4IRS/AllStar>

This list is just fine to discuss ARM based AllStar installs. There are quite a few users here running RPi1, RPi2 and other ARM based boards. If you would rather use a X86 board, there is a Debian alternative to Acid on the way. From "bare metal" to fully functional node.

73, Steve N4IRS

-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.