tmg-707 interface board
For those of you interested in interfacing a Kenwood TMG-707a to app_rpt, check this out: http://app-rpt.qrvc.com/node/162 JIM WB6NIL
Finally did the update to the KC0SOK Asterisk RF Gateway today and ran into a problem with the reverse patch. It works fine calling out to the node, but when I try to initiate a call to PSTN or IP Phone the audio is muted until *98 is entered. Is there some added steps in the 0.203 package that needs to be done in order to have Pv work? The previous version that I was using worked fine with VOX on the reverse patch (0.152) Mars, N0PCO ALERTradio ERC www.alertradio.net.
app_rpt@alertradio.net wrote:
Finally did the update to the KC0SOK Asterisk RF Gateway today and ran into a problem with the reverse patch.
It works fine calling out to the node, but when I try to initiate a call to PSTN or IP Phone the audio is muted until *98 is entered. Is there some added steps in the 0.203 package that needs to be done in order to have Pv work? The previous version that I was using worked fine with VOX on the reverse patch (0.152)
Mars, N0PCO ALERTradio ERC www.alertradio.net. _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Hi Mars, Dunno-- There must be something else causing this problem. I just tested it om my Limey linux system on node 2010 with app_rpt.c version 0.207 and it works as advertised. You are running a really old version of app_rpt.c. Did you upgrade the whole asterisk source package or just app_rpt.c? If just app_rpt.c was upgraded, try upgrading all of the sources. Steve WA6ZFT
participants (3)
-
app_rpt＠alertradio.net -
Jim Duuuude -
Stephen Rodgers