Use Allmon2/Supermon to disable things on the fly. Lee On Sep 23, 2017 5:28 PM, "Hayden Honeywood" <haydenph91@gmail.com> wrote: I fixed this issue that I posted about earlier... The problem happened to be RF getting into the receiver directly and horrible desense occurring. Managed to tighten things down and fix the issue. I am a little concerned as weather conditions are a bit variable at one of our sites, and it has been known to cause the repeater to talk to itself. Are there any easier way to disable individual transmitters if needed rather than creating multiple voter.conf files and reloading? _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.