Any RTCM Voter Installations Out There?
I very recently purchased my RTCM module and will be ordering a second one soon. It will be a while before I have time to get it all running, but I thought I'd see whether there are any "average" users out there who might relate their experiences for the purpose of helping to educate me. (Jim Dixon has very kindly offered assistance, but because of work commitments it will be a while before I can meet with him.) I gather that chan_voter isn't included in the current ACID CENTOS distribution and will need to be compiled on my system. I can do this as I have a little bit of UNIX/Linux experience, but I don't want re-invent the wheel unnecessarily. Is there any documentation that I should be reading in addition to that on the voter project site? Thanks. 73, Fred Bray W6WAW
I'm not so sure about an "average" user, but I'm glad to help anyway. :-) The stuff on the project page is old. There's a newer voter doc on the micro-node site. Read through that but don't feel bad if it doesn't make total sense. It's easy once you know how. I'll be glad to help you shorten the learning curve. Just send me an email off list or post your questions here. Telephone is ok too... sometimes that's much easier. -- Tim :wq On May 17, 2012, at 9:27 AM, Frederick Bray wrote:
I very recently purchased my RTCM module and will be ordering a second one soon.
It will be a while before I have time to get it all running, but I thought I'd see whether there are any "average" users out there who might relate their experiences for the purpose of helping to educate me. (Jim Dixon has very kindly offered assistance, but because of work commitments it will be a while before I can meet with him.)
I gather that chan_voter isn't included in the current ACID CENTOS distribution and will need to be compiled on my system. I can do this as I have a little bit of UNIX/Linux experience, but I don't want re-invent the wheel unnecessarily.
Is there any documentation that I should be reading in addition to that on the voter project site?
Thanks.
73,
Fred Bray W6WAW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I just upgraded to the latest SVN and then created the voter.conf file and restarted app_rpt... And bang... Chris KB2FAf On 05/17/2012 02:10 PM, Tim Sawyer wrote:
I'm not so sure about an "average" user, but I'm glad to help anyway. :-)
The stuff on the project page is old. There's a newer voter doc on the micro-node site. Read through that but don't feel bad if it doesn't make total sense. It's easy once you know how. I'll be glad to help you shorten the learning curve. Just send me an email off list or post your questions here. Telephone is ok too... sometimes that's much easier. -- Tim :wq
On May 17, 2012, at 9:27 AM, Frederick Bray wrote:
I very recently purchased my RTCM module and will be ordering a second one soon.
It will be a while before I have time to get it all running, but I thought I'd see whether there are any "average" users out there who might relate their experiences for the purpose of helping to educate me. (Jim Dixon has very kindly offered assistance, but because of work commitments it will be a while before I can meet with him.)
I gather that chan_voter isn't included in the current ACID CENTOS distribution and will need to be compiled on my system. I can do this as I have a little bit of UNIX/Linux experience, but I don't want re-invent the wheel unnecessarily.
Is there any documentation that I should be reading in addition to that on the voter project site?
Thanks.
73,
Fred Bray W6WAW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
The latest source kit that gets loaded with NEW ACID installs now has chan_voter included with it. Any old installations need the SVN upgrade. Jim from the Dayton Hamfest
Date: Thu, 17 May 2012 09:27:37 -0700 From: fwbray@mminternet.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Any RTCM Voter Installations Out There?
I very recently purchased my RTCM module and will be ordering a second one soon.
It will be a while before I have time to get it all running, but I thought I'd see whether there are any "average" users out there who might relate their experiences for the purpose of helping to educate me. (Jim Dixon has very kindly offered assistance, but because of work commitments it will be a while before I can meet with him.)
I gather that chan_voter isn't included in the current ACID CENTOS distribution and will need to be compiled on my system. I can do this as I have a little bit of UNIX/Linux experience, but I don't want re-invent the wheel unnecessarily.
Is there any documentation that I should be reading in addition to that on the voter project site?
Thanks.
73,
Fred Bray W6WAW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Jim. It was a pleasure and great surprise seeing you in Dayton. Now that I am back I have a thousand questions!!! The first one is: Is this the start of an annual trek??? Maybe a get-together of Allstar Node operators could be arranged next time! Eric Meth - ve3ei
participants (5)
-
Chris Perrine (KB2FAF) -
Eric Meth - ve3ei -
Frederick Bray -
Jim Duuuude -
Tim Sawyer