i was looking up on allstarlink for where to plug in the port number on jims's side, but didn't see anywhere to specify it. everything works from my side...got the router and firewall set up right, etc...just missing that one ifinal piece of the puzzle. thanx. -- Bryan Sent from my iPhone please forgive misspellings... On Sep 21, 2012, at 4:42, "Ken" <ke2n@cs.com> wrote:
The node:port format is for the bindaddr= command, of course. For bindport= you just put in the port number.
Ken
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Ken Sent: Friday, September 21, 2012 4:40 AM To: 'Bryan D. Boyle'; 'app_rpt mailing list' Subject: Re: [App_rpt-users] changing IAX port
Brian It's in iax.conf
You can use the keyword "bindport=" or you can add the port to the number in "bindaddr=" (node:port)
This port number needs to be in your router too and in the registration server (use the portal to specify the port you selected)
Also, if you have any non-registering nodes in that system, the port number needs to be explicitly used in identifying those nodes to the other system.
73
Ken
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of Bryan D. Boyle Sent: Thursday, September 20, 2012 10:17 PM To: app_rpt mailing list Subject: [App_rpt-users] changing IAX port
I'm installing a second computer here to drive Yet More RF out of the House of RF here...and since I'm doing so...wondering where on the mother ship do you change the port that IAX is configured for.
I think I see where, in the config files, you change it...but, obviously, the head end has to know where the handshake is supposed to go.
Am I missing something? Not that that would be out of character (according to my bride...), but...just thought I'd ask.
Tnx
Bryan WB0YLE _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
It is listed under the server / network configuration. If you do not change it there, no one will be able to connect to you because it will be trying to connect to the wrong port. Corey N3FE -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bryan D. Boyle Sent: Friday, September 21, 2012 7:10 AM To: Ken Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] changing IAX port i was looking up on allstarlink for where to plug in the port number on jims's side, but didn't see anywhere to specify it. everything works from my side...got the router and firewall set up right, etc...just missing that one ifinal piece of the puzzle. thanx. -- Bryan Sent from my iPhone please forgive misspellings... On Sep 21, 2012, at 4:42, "Ken" <ke2n@cs.com> wrote:
The node:port format is for the bindaddr= command, of course. For bindport= you just put in the port number.
Ken
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Ken Sent: Friday, September 21, 2012 4:40 AM To: 'Bryan D. Boyle'; 'app_rpt mailing list' Subject: Re: [App_rpt-users] changing IAX port
Brian It's in iax.conf
You can use the keyword "bindport=" or you can add the port to the number in "bindaddr=" (node:port)
This port number needs to be in your router too and in the registration server (use the portal to specify the port you selected)
Also, if you have any non-registering nodes in that system, the port number needs to be explicitly used in identifying those nodes to the other system.
73
Ken
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of Bryan D. Boyle Sent: Thursday, September 20, 2012 10:17 PM To: app_rpt mailing list Subject: [App_rpt-users] changing IAX port
I'm installing a second computer here to drive Yet More RF out of the House of RF here...and since I'm doing so...wondering where on the mother ship do you change the port that IAX is configured for.
I think I see where, in the config files, you change it...but, obviously, the head end has to know where the handshake is supposed to go.
Am I missing something? Not that that would be out of character (according to my bride...), but...just thought I'd ask.
Tnx
Bryan WB0YLE _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=A6B142227.A8740
Got it...needed to put in nameservers in resolv.conf...duh. (how did I figure that out? compared it to existing server..and couldn't resolve name...*smack*) Now...to just configure it properly. Next issue...talking server to server inside a NAT'd network....so I can link the two inside... Onward and downward...
participants (2)
-
Bryan D. Boyle -
Corey Dean