How to attach URI to exsisting Cat 300 Controller
I would like to know how to go about hooking up a URI to the link port of the CAT 300 controller. We have a remote site and the computer went down, so I want to put the Cat controller back in place and still have Allstar connection. The problem I have is the link port has to see a COR from the link Device (usually a Radio) . How do I get COR from the URI?? so that port 1 will send transmit signal to Repeater TX??
You hook the the PTT of the URI to the COR of the controller and visa-virsa. CNTRL URI PTT -> COR COR <- PTT TX -> RX RX <- TX Also read http://ohnosec.org/drupal/node/84 -- Tim :wq On Nov 11, 2011, at 10:51 AM, Brian Williams wrote:
I would like to know how to go about hooking up a URI to the link port of the CAT 300 controller.
We have a remote site and the computer went down, so I want to put the Cat controller back in place and still have Allstar connection.
The problem I have is the link port has to see a COR from the link Device (usually a Radio) . How do I get COR from the URI?? so that port 1 will send transmit signal to Repeater TX??
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Brian Williams -
Tim Sawyer