Eric, Did nodesetup work? That's your best bet as the portal download has been problematic for some users. On Fri, Feb 2, 2018 at 8:33 AM, Eric (KG6WXC) <kg6wxc@gmail.com> wrote:

Hello to all!

I have been trying to get an allstar node setup for a friend of mine who is not all that command line savvy. He was rather excited when it seemed he could use the web portal to configure his server if he needed to.

I have the server and node setup just fine, but when ever I try to use the Web Portal to make configuration changes and then click on "Download Configuration" the changes never seen to be made on the server itself until I manually run nodesetup again.

Is there something simple I am missing to get the web portal to be able to configure the server automatically?

I used the RAT_RC1.img file to install the system. (downloaded from allstarlink.org) I changed the root user password, but there was no other "setup scripts" than ran, I was only prompted to change passwords. I finally found and ran nodesetup on my own.

I have tried to use the portalconfig.sh script also, to no avail.

Ports 4569 and 5198-5199 are forwarded to the system.

Any help or ideas is appreciated! 73 eric/kg6wxc

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- Tim WD6AWP