I figured it out, I had to turn rxsquelchdelay off. On Sun, Apr 3, 2016 at 1:33 PM, Skyler F <electricity440@gmail.com> wrote:

I just set up a remote base with deemphasized audio, not discriminator.

On usbradio.conf when I set up rxdemod=flat, the audio sounds very bassy coming from my remote base, so I changed it to rxdemod=speaker.

I restarted asterisk, and now no audio came from the radio, just a dead carrier, even when I turned the rx level to 999 in usbradio.conf.

73 Skyler

_____________________________________ Here is my usbradio.conf file: [general]

[usb]

hdwtype=0 rxboost=1 txboost=0 rxctcssrelax=1 txctcssdefault=250.3 ;rxctcssfreqs=100 ;txctcssfreqs=100 ;rxctcssoverride=1 carrierfrom=usb ctcssfrom=usb rxdemod=speaker !!!I get audio when this is set to flat, but nothing on speaker!!! txprelim=no txlimonly=no txtoctype=phase txmixa=composite txmixb=no invertptt=0 duplex=1 rxondelay=1 rxsquelchdelay=25 rxnoisefiltype=0 eeprom=0

;gpio=out1

gpio1 = out1 ; in, out0 or out1 gpio2 = out1 gpio4 = in ; in, out0 or out1

-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com