That wasn't the issue. It appears that app_rpt is only happy with inbound connections using GSM from TLB although outbound from app_rpt I can use any codec.. Robert N5QM On Sun, Jul 7, 2013 at 8:30 PM, Geoff Edmonson <w5omr@att.net> wrote:

Kinda sounds like TLB is trying to write HTML code and is specifying frames, but frames aren't supported in HTML 2.0 format. Since the default Acid install doesn't support a GUI, it'd be my guess that anything higher than whatever the bottom rung version is wouldn't be included in the custom distro.

Of course, that's only a guess...

Robert Garcia <robert@n5qm.com> wrote:

...

All,

I am having an issue with connectivity from TLB to app_rpt. Outbound connectivity from app_rpt works fine between the same nodes.

When I attempt to connect from TLB to app_rpt, the asterisk console streams many of these same messages.

[Jul 6 10:34:38] WARNING[21006]: chan_tlb.c:1362 TLB_xwrite: Cannot handle frames in 2 format [Jul 6 10:34:38] WARNING[21006]: chan_tlb.c:1362 TLB_xwrite: Cannot handle frames in 2 format

Any ideas on what might be going wrong?

Robert N5QM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

---

App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users