So I shut down my server and repeater to do some house keeping and cables routing. When I powered back up I noticed the URI would blink green briefly go solid for a bit and then blink again. Of coarse my repeater was not "repeating" I logged in via ssh and went to the CLI and I was greeted with this. Last login: Wed Oct 8 17:35:04 2014 from 192.168.0.1 [root@N1XBM ~]# asterisk -r Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk currently running on N1XBM (pid = 2565) Verbosity is at least 3 [Oct 8 17:39:35] NOTICE[2573]: app_rpt.c:22031 rpt_master: RPT thread restarted on 27086 [Oct 8 17:39:35] WARNING[2573]: app_rpt.c:22043 rpt_master: rpt_thread restarted on node 27086 -- Re-Loading config for repeater 27086 -- rpt (Rx) initiating call to Radio/usb27086 on Radio/usb27086 [Oct 8 17:39:35] WARNING[2609]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [Oct 8 17:39:35] ERROR[2609]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [Oct 8 17:39:37] NOTICE[2573]: app_rpt.c:22031 rpt_master: RPT thread restarted on 27086 [Oct 8 17:39:37] WARNING[2573]: app_rpt.c:22043 rpt_master: rpt_thread restarted on node 27086 -- Re-Loading config for repeater 27086 -- rpt (Rx) initiating call to Radio/usb27086 on Radio/usb27086 [Oct 8 17:39:37] WARNING[2611]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [Oct 8 17:39:37] ERROR[2611]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [Oct 8 17:39:39] ERROR[2573]: app_rpt.c:22026 rpt_master: Continual RPT thread restarts, killing Asterisk N1XBM*CLI> Disconnected from Asterisk server [root@N1XBM ~]# I then attached a monitor and rebooted. The failure was when starting zaptel. It said it couldn't find /dev/zap. Ugh I just don't know enough about this to understand what caused it or how to fix it. I did use ex file explorer and did not under /dev there isn't any zap. Any help? Thank you
While moving wires should make this necessary, this procedure might fix it. http://docs.allstarlink.org/drupal/node/111 -- Tim :wq On Oct 8, 2014, at 3:27 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I shut down my server and repeater to do some house keeping and cables routing.
When I powered back up I noticed the URI would blink green briefly go solid for a bit and then blink again. Of coarse my repeater was not "repeating"
I logged in via ssh and went to the CLI and I was greeted with this.
Last login: Wed Oct 8 17:35:04 2014 from 192.168.0.1 [root@N1XBM ~]# asterisk -r Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk currently running on N1XBM (pid = 2565) Verbosity is at least 3 [Oct 8 17:39:35] NOTICE[2573]: app_rpt.c:22031 rpt_master: RPT thread restarted on 27086 [Oct 8 17:39:35] WARNING[2573]: app_rpt.c:22043 rpt_master: rpt_thread restarted on node 27086 -- Re-Loading config for repeater 27086 -- rpt (Rx) initiating call to Radio/usb27086 on Radio/usb27086 [Oct 8 17:39:35] WARNING[2609]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [Oct 8 17:39:35] ERROR[2609]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [Oct 8 17:39:37] NOTICE[2573]: app_rpt.c:22031 rpt_master: RPT thread restarted on 27086 [Oct 8 17:39:37] WARNING[2573]: app_rpt.c:22043 rpt_master: rpt_thread restarted on node 27086 -- Re-Loading config for repeater 27086 -- rpt (Rx) initiating call to Radio/usb27086 on Radio/usb27086 [Oct 8 17:39:37] WARNING[2611]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [Oct 8 17:39:37] ERROR[2611]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [Oct 8 17:39:39] ERROR[2573]: app_rpt.c:22026 rpt_master: Continual RPT thread restarts, killing Asterisk N1XBM*CLI> Disconnected from Asterisk server [root@N1XBM ~]#
I then attached a monitor and rebooted. The failure was when starting zaptel. It said it couldn't find /dev/zap.
Ugh I just don't know enough about this to understand what caused it or how to fix it. I did use ex file explorer and did not under /dev there isn't any zap.
Any help?
Thank you
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
That should have been “...should not make this necessary”... -- Tim :wq On Oct 8, 2014, at 4:17 PM, Tim Sawyer <tim.sawyer@mac.com> wrote:
While moving wires should make this necessary, this procedure might fix it.
http://docs.allstarlink.org/drupal/node/111
-- Tim :wq
On Oct 8, 2014, at 3:27 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I shut down my server and repeater to do some house keeping and cables routing.
When I powered back up I noticed the URI would blink green briefly go solid for a bit and then blink again. Of coarse my repeater was not "repeating"
I logged in via ssh and went to the CLI and I was greeted with this.
Last login: Wed Oct 8 17:35:04 2014 from 192.168.0.1 [root@N1XBM ~]# asterisk -r Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk currently running on N1XBM (pid = 2565) Verbosity is at least 3 [Oct 8 17:39:35] NOTICE[2573]: app_rpt.c:22031 rpt_master: RPT thread restarted on 27086 [Oct 8 17:39:35] WARNING[2573]: app_rpt.c:22043 rpt_master: rpt_thread restarted on node 27086 -- Re-Loading config for repeater 27086 -- rpt (Rx) initiating call to Radio/usb27086 on Radio/usb27086 [Oct 8 17:39:35] WARNING[2609]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [Oct 8 17:39:35] ERROR[2609]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [Oct 8 17:39:37] NOTICE[2573]: app_rpt.c:22031 rpt_master: RPT thread restarted on 27086 [Oct 8 17:39:37] WARNING[2573]: app_rpt.c:22043 rpt_master: rpt_thread restarted on node 27086 -- Re-Loading config for repeater 27086 -- rpt (Rx) initiating call to Radio/usb27086 on Radio/usb27086 [Oct 8 17:39:37] WARNING[2611]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [Oct 8 17:39:37] ERROR[2611]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [Oct 8 17:39:39] ERROR[2573]: app_rpt.c:22026 rpt_master: Continual RPT thread restarts, killing Asterisk N1XBM*CLI> Disconnected from Asterisk server [root@N1XBM ~]#
I then attached a monitor and rebooted. The failure was when starting zaptel. It said it couldn't find /dev/zap.
Ugh I just don't know enough about this to understand what caused it or how to fix it. I did use ex file explorer and did not under /dev there isn't any zap.
Any help?
Thank you
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
You may need to update your software and reload Zatel... check out http://docs.allstarlink.org/drupal/node/111 Thanks, Bob kk6ecm Sent from iPad
On Oct 8, 2014, at 3:27 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I shut down my server and repeater to do some house keeping and cables routing.
When I powered back up I noticed the URI would blink green briefly go solid for a bit and then blink again. Of coarse my repeater was not "repeating"
I logged in via ssh and went to the CLI and I was greeted with this.
Last login: Wed Oct 8 17:35:04 2014 from 192.168.0.1 [root@N1XBM ~]# asterisk -r Asterisk , Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk currently running on N1XBM (pid = 2565) Verbosity is at least 3 [Oct 8 17:39:35] NOTICE[2573]: app_rpt.c:22031 rpt_master: RPT thread restarted on 27086 [Oct 8 17:39:35] WARNING[2573]: app_rpt.c:22043 rpt_master: rpt_thread restarted on node 27086 -- Re-Loading config for repeater 27086 -- rpt (Rx) initiating call to Radio/usb27086 on Radio/usb27086 [Oct 8 17:39:35] WARNING[2609]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [Oct 8 17:39:35] ERROR[2609]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [Oct 8 17:39:37] NOTICE[2573]: app_rpt.c:22031 rpt_master: RPT thread restarted on 27086 [Oct 8 17:39:37] WARNING[2573]: app_rpt.c:22043 rpt_master: rpt_thread restarted on node 27086 -- Re-Loading config for repeater 27086 -- rpt (Rx) initiating call to Radio/usb27086 on Radio/usb27086 [Oct 8 17:39:37] WARNING[2611]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/zap/pseudo': No such file or directory [Oct 8 17:39:37] ERROR[2611]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory [Oct 8 17:39:39] ERROR[2573]: app_rpt.c:22026 rpt_master: Continual RPT thread restarts, killing Asterisk N1XBM*CLI> Disconnected from Asterisk server [root@N1XBM ~]#
I then attached a monitor and rebooted. The failure was when starting zaptel. It said it couldn't find /dev/zap.
Ugh I just don't know enough about this to understand what caused it or how to fix it. I did use ex file explorer and did not under /dev there isn't any zap.
Any help?
Thank you
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
kk6ecm -
Robert Newberry -
Tim Sawyer