Re: [App_rpt-users] App_rpt-users Digest, Vol 43, Issue 15

8 Sep 2012

      Disconnection update

I would like if possible for the node to say "Disconnecting from node XXXX,
Or simple you are now disconnected". I normally send *51 to disconnect and I
hear "beep beep"
Also on time outs from a the Win system it just goes silent on disconnection
so when time out kicks in it would be appreciated to have "Time Out " and at
least I would know to re-connect

Many thanks if a Asterisk bod can help

Regards

Keith  

-----Original Message-----
From: app_rpt-users-bounces@ohnosec.org
[mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of
app_rpt-users-request@ohnosec.org
Sent: 08 September 2012 17:00
To: app_rpt-users@ohnosec.org
Subject: App_rpt-users Digest, Vol 43, Issue 15

Send App_rpt-users mailing list submissions to
	app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
	app_rpt-users-request@ohnosec.org

You can reach the person managing the list at
	app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific than
"Re: Contents of App_rpt-users digest..."

Today's Topics:

   1. Re: pickle problem after upgrade (George Csahanin)
   2. Re: Slow green led flashing on uri? (Anthony Percy)
   3. Re: Slow green led flashing on uri? (Ken)
   4. Remote help (Keith)
   5. Re: Remote help (Jeffrey S. Carrier)

----------------------------------------------------------------------

Message: 1
Date: Fri, 7 Sep 2012 12:08:31 -0400
From: "George Csahanin" <george@dyb.com>
To: "George Csahanin" <george@dyb.com>,	<app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] pickle problem after upgrade
Message-ID: <983158B7D9BD46078E7CF330B933AE02@Goofy12>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
	reply-type=original

Upgraded pickle last night, got this message repeating then asterisk dies
off, went back to old sources, same thing. My brain is way too foggy with
family issues here, can someone point to what I may have wrong, I just can't
think too clearly.

GeorgeC
W2DB
2360

Connected to Asterisk  currently running on nat (pid = 29110) [Sep  7
12:25:08] NOTICE[29115]: app_radbridge.c:599 radbridge_master: RPT thread
restarted on instance1 [Sep  7 12:25:08] WARNING[29115]: app_radbridge.c:610
radbridge_master: 
radbridge_thread restarted on node instance1 [Sep  7 12:25:08]
NOTICE[29115]: app_radbridge.c:599 radbridge_master: RPT thread restarted on
instance2 [Sep  7 12:25:08] WARNING[29115]: app_radbridge.c:610
radbridge_master: 
radbridge_thread restarted on node instance2 [Sep  7 12:25:08]
WARNING[29163]: channel.c:3051 ast_request: No channel type registered for
'Voter'
[Sep  7 12:25:08] ERROR[29163]: app_radbridge.c:289 radbridge: 
radbridge:Sorry unable to obtain channel [Sep  7 12:25:08] WARNING[29164]:
channel.c:3051 ast_request: No channel type registered for 'Voter'
[Sep  7 12:25:08] ERROR[29164]: app_radbridge.c:289 radbridge: 
radbridge:Sorry unable to obtain channel [Sep  7 12:25:10] NOTICE[29115]:
app_radbridge.c:599 radbridge_master: RPT thread restarted on instance1 [Sep
7 12:25:10] WARNING[29115]: app_radbridge.c:610 radbridge_master: 
radbridge_thread restarted on node instance1

I figured it out, I recompiled just from the asterisk directory, not from
astsrc...all seems fine now

GeorgeC 

------------------------------

Message: 2
Date: Sat, 8 Sep 2012 21:36:51 +1000
From: Anthony Percy <anthcp@gmail.com>
To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Slow green led flashing on uri?
Message-ID:
	<CA+rLymFntc7ZVMXG24iUJSTJ_4gEECOtb1iNNZpqensgWi5P=Q@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Hi all,
The plot thickens.... I need to explain what I mean by the flashing green
LED on the C-Media based URI... Normally when it is connected to our main
repeater allstar PC and working, it flashes at about once a second...
However on the new ASUS mobo Allstar ACID build it only flashes about once
every 2-3 seconds once asterisk has started... As you have guessed it does
not pass repeater audio in this state. But it did once when it was unplugged
and then plugged in, it flashed at once a second and the repeater audio
worked on the new ASUS mobo.

Has anyone had a similar experience???
Its looking more like to me that it is a problem with the latest ACID
install and the new ASUS i3 motherboard we are using....
Whats strange is there are no errors in the message logs ( system and
asterisk) or when you debug rpt in the asterisk console...
The other symptom is sometimes when you plug or unplug the URI in, it hangs
the PC!!!

Could some explain why the URI flashes at once a second when it is
operational and under what condition it would flash slower???

Regards

Anthony VK2ACP

On Mon, Sep 3, 2012 at 1:04 PM, Anthony Percy <anthcp@gmail.com> wrote:
...
Hi all,
Tried to make a backup of an allstar server onto a new i3 Asus mobo.
Loaded acid install and works apart from onboard netcard which was fixed
by a new driver.
However with the backup config files loaded all we get is hum when we
plugged on the repeater uri. We thought it was a ground loop problem untill
after a reboot it all worked, audio on the repeater was fine!!! On reboot we
were back to hum... Someone then noticed the uri green led was flashing
slower than when it was working ok...any ideas????
Regards
VK2ACP
------------------------------

Message: 3
Date: Sat, 8 Sep 2012 09:52:17 -0400
From: "Ken" <ke2n@cs.com>
To: "'Anthony Percy'" <anthcp@gmail.com>, <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Slow green led flashing on uri?
Message-ID: <003501cd8dc9$292b7830$7b826890$@cs.com>
Content-Type: text/plain;	charset="us-ascii"

My understanding is that the USB protocol requires 3 (re)tries on error.
If you get the "slow blink" your USB comms are not working. Or they are
working and returning all garbage.

Ken

PS: On my 3 systems the basic blink rate is faster than 1/second - more like
3-4/second
...
-----Original Message-----
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- 
bounces@ohnosec.org] On Behalf Of Anthony Percy
Sent: Saturday, September 08, 2012 7:37 AM
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Slow green led flashing on uri?
Hi all,
The plot thickens.... I need to explain what I mean by the flashing 
green
LED
on the C-Media based URI... Normally when it is connected to our main 
repeater allstar PC and working, it flashes at about once a second...
However
on the new ASUS mobo Allstar ACID build it only flashes about once 
every
2-3
seconds once asterisk has started... As you have guessed it does not 
pass repeater audio in this state. But it did once when it was 
unplugged and
then
plugged in, it flashed at once a second and the repeater audio worked 
on
the
new ASUS mobo.
Has anyone had a similar experience???
Its looking more like to me that it is a problem with the latest ACID
install and
the new ASUS i3 motherboard we are using....
Whats strange is there are no errors in the message logs ( system and
asterisk) or when you debug rpt in the asterisk console...
The other symptom is sometimes when you plug or unplug the URI in, it 
hangs the PC!!!
Could some explain why the URI flashes at once a second when it is 
operational and under what condition it would flash slower???
Regards
Anthony VK2ACP
On Mon, Sep 3, 2012 at 1:04 PM, Anthony Percy <anthcp@gmail.com> wrote:
...
Hi all,
Tried to make a backup of an allstar server onto a new i3 Asus mobo.
Loaded acid install and works apart from onboard netcard which was 
fixed
by a new driver.
However with the backup config files loaded all we get is hum when 
we
plugged on the repeater uri. We thought it was a ground loop problem
untill
after a reboot it all worked, audio on the repeater was fine!!! On 
reboot
we
were back to hum... Someone then noticed the uri green led was 
flashing slower than when it was working ok...any ideas????
Regards
VK2ACP

App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
------------------------------

Message: 4
Date: Sat, 8 Sep 2012 15:52:25 +0100
From: "Keith" <keith@handscombe.co.uk>
To: <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Remote help
Message-ID: <001301cd8dd1$8f7c1f10$ae745d30$@co.uk>
Content-Type: text/plain;	charset="us-ascii"

Hi All,

I would like some Asterisk help adding the time on the hour and a
disconnection announcement if possible. After having a read and getting
advice from 2 Asterisk users I had a play and the node came to a halt all my
own fault as I was in babysitting mode and I still so not understand some of
the details.
I have a ghost image and all back in less than a hour from bootable DVD so
all working once more.

If anyone has advice or can connect and help I would appreciate please

Many thanks

Keith 

NODE: 2498 

------------------------------

Message: 5
Date: Sat, 08 Sep 2012 09:15:27 -0600
From: "Jeffrey S. Carrier" <jeff.carrier@rmsmsecurity.com>
To: <app_rpt-users@ohnosec.org>,	<keith@handscombe.co.uk>
Subject: Re: [App_rpt-users] Remote help
Message-ID: <001a01cd8dd4$c8836c25$1e00000a@plantprotection.ad>
Content-Type: text/plain; charset="utf-8"

Keith, 

The time is fairly easy, what kind of disconnect announcement are you
looking for.  Can you explain that part?  

K0jsc

Jeffrey S. Carrier
Fire Inspector, Plant Protection
(719) 561-7199 direct
(719) 561-6567 fax
1612 E. Abriendo Ave. Pueblo, Colorado 81004 jeffrey.carrier@evrazincna.com 

Sent from my Android phone using TouchDown

-----Original Message-----
From: Keith [keith@handscombe.co.uk]
Received: Saturday, 08 Sep 2012, 8:52am
To: app_rpt-users@ohnosec.org [app_rpt-users@ohnosec.org]
Subject: [App_rpt-users] Remote help

Hi All,

I would like some Asterisk help adding the time on the hour and a
disconnection announcement if possible. After having a read and getting
advice from 2 Asterisk users I had a play and the node came to a halt all my
own fault as I was in babysitting mode and I still so not understand some of
the details.
I have a ghost image and all back in less than a hour from bootable DVD so
all working once more.

If anyone has advice or can connect and help I would appreciate please

Many thanks

Keith 

NODE: 2498 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

End of App_rpt-users Digest, Vol 43, Issue 15
*********************************************

Keith

tags

participants (1)