if you have multiple nodes behind a firewall and not doing a 'hairpin NAT' (Ubiquity routers have it, and IIRC, so does Dd-wrt), then, yes, you need to list your nodes, especially if they are on separate boxes. reason being, the head end resolves back to your external address, which is hidden by the NAT (that you're using the nonroutable class C 192.168.x.x says you are). If they are all on one box, with multiple nodes, it's not a big deal to do it. -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.

On Oct 12, 2016, at 11:24, DuaneVT . <selkie2@comcast.net> wrote:

[nodes] ; Note, if you are using automatic update for Allstar link nodes, ; no Allstar link nodes should be defined here. Only place a definition for your local nodes, and private (off of Allstar link) nodes here. 40000 = radio@127.0.0.1/40000,NONE 40001 = radio@192.168.1.100:4568/40001,NONE <<<< IP and port of other local server

I have public node on 42996, also acting as a local repeater controller, behind a server firewall. Is this a "local" node? Should I set: 42996=radio@192.168.x.x/42996,none or comment out everything? thanks, Duane KA1LM #42996 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.