I found only one code (92) to turn off an allstar repeater and it seems to do so by disabling the reciever. Unfortunatly now i can not turn it back on because the reciever is "DISABLED". Have i just found the wrong code or am i missing something here? Pursuant to U.S. Code, title 47, Chapter 5, Sub-chapter II, ß227, "Any and all non-solicited commercial E-mail sent to this address is subject to a download and archival fee of $500.00 U.S.". E-mailing denotes acceptance of these terms.
You would be missing the fact that you used this technology to be a pest Mr Jurenka. Good luck in your quest for knowledge from the people you told onair that "Wedon't need on 435/450". Please observe that your now asking the very same people for help. Yours sincerely. Just one of the many listening to the daily atrocities on the repeaters of doom and stupidity. Oh yes you really do represent the ham fraternity well don't you!
You're missing something. First, 92 is only what's provided in the example rpt.conf file. Control codes for things like disabling the repeater probably should be changed to some non-default thing (I did so on mine). If you look, however, at the source code, you'll see that there's an option to "warm boot" the repeater. Also, the code you reference doesn't disable the receiver.
participants (3)
-
Alain Mugnier -
Buddy Brannan -
jumping_jackass＠yahoo.com