Does it say [root@test ~]# If so you're done and now you can start configuring your system. Try googling there are some excellent pdf out there guiding you thru the configuration.

No need to Google. As stated your password is what you set when it told you to change it. Remember that the PaSSwOrd is case-sensitive. Otherwise, if you are logged into the box just type [root@allstar]# passwd root and follow the prompts to again change your password. Or not. Re-type the same password that you think it is. But don’t make it too simple. You should also employ some security but that is beyond the scope of this email other than considering locking ssh down. From: Hugo Escalante Sent: Friday, February 06, 2015 5:06 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] First Installation Attempt I have install the CentOS software and it rebooted a few times and ask me to change the root password which I did. Now it ask for test login: I'm not sure what login to input. whatever I try it fails any help? Hugo K7HJE -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.