Lu, It's not quite what you asked for, but I have a pretty well commented usbradio.conf on <https://github.com/N4IRS/AllStar/blob/master/configs/usbradio.conf> On comment, even though you are going to use just CTCSS decode, you want to assert COS. Even if it is all the time. try setting carrierfrom to usbinvert and pull the COS pin on the URI low. Set ctcssfrom to USB for a active high signal from your CTCSS decoder. 73, Steve N4IRS On 06/07/2015 03:44 PM, app_rpt-users-request@ohnosec.org wrote:

Message: 2 Date: Sun, 7 Jun 2015 14:05:30 -0400 From: Lu Vencl<luvencl8@gmail.com> To: app_rpt mailing list<app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Non-DSP operation Message-ID:<8D5072B9-F1E3-477C-826F-81B7F6F05483@gmail.com> Content-Type: text/plain; charset=us-ascii

Can somebody send me an example USB file on how you should configure a no that is not running off solely the discriminator processing? I am running discriminator but I am trying to use CTCSS off my repeater. It is tied to pin number seven on the URI, however no matter if I use USB or USB invert I can't seem to get the signaling straightened out. My repeater sends out 12v when CTCSS is detected. I have cor set to no. Anyone have any ideas or can provide a sample for me please?

Lu Vencl