Web Transceiver Telemetry
I wanted to turn off announcements for the web transceiver I setup my rpt.conf file as follows: telemetry=telemetry ... [telemetry] eannmode=0 ; echolink telemetry guilinkdefault=0 ; gui telemetry telemdefault=0 ; local telemetry phonelinkdefault=0 ; phone telemetry But I still hear the telemetry. Either I have the parameters wrong or is that controlled by the Web Transceiver? Also, is there a way to automatically connect to a node once asterisk is restarted or after a reboot? Thanks, Greg
You can use the startup macro to make a connection on restart/reboot See http://app-rpt.qrvc.com/node/143 73 Ken
-----Original Message----- From: app_rpt-users-bounces@qrvc.com [mailto:app_rpt-users- bounces@qrvc.com] On Behalf Of Greg Thornwall Sent: Wednesday, December 01, 2010 11:05 AM To: App_rpt-users@qrvc.com Subject: [App_rpt-users] Web Transceiver Telemetry
I wanted to turn off announcements for the web transceiver I setup my rpt.conf file as follows:
telemetry=telemetry ...
[telemetry] eannmode=0 ; echolink telemetry guilinkdefault=0 ; gui telemetry telemdefault=0 ; local telemetry phonelinkdefault=0 ; phone telemetry
But I still hear the telemetry. Either I have the parameters wrong or is that controlled by the Web Transceiver?
Also, is there a way to automatically connect to a node once asterisk is restarted or after a reboot?
Thanks, Greg
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
On Wednesday, December 01, 2010 08:04:40 am Greg Thornwall wrote:
I wanted to turn off announcements for the web transceiver I setup my rpt.conf file as follows:
telemetry=telemetry ...
[telemetry] eannmode=0 ; echolink telemetry guilinkdefault=0 ; gui telemetry telemdefault=0 ; local telemetry phonelinkdefault=0 ; phone telemetry
The problem with turning off local telemetry, is it turns off ALL announcements. I'd just like to turn off connection messages for all nodes except my own node. I want to hear other local telemetry announcements. Right now, I have everything turned on becacause when I am connected to a busy node, the connect/disconnect messages overpower any QSO in progress. But, that also leaves me without *80 and other local announcements I need to hear. :( :( 8-Dale -- PickleJar Software | Home of the Pico Node! Open your mind, Read, Learn, Think, Apply, and Have Fun! AllStarLink Node 2392 | EchoLink node 6185 | 73, from N7PKT! Main site: http://www.picklejar.org | Blog: TBH
participants (3)
-
Dale Weber -
Greg Thornwall -
Ken