Hello Jamey, If your time is off it might not connect to the ASL servers.. If you have ntp installed you can edit the /etc/ntp.conf and make the changes there. If your using a DHCP make the changes to your DHCP server. David KE6UPI On Fri, Jan 6, 2017 at 10:54 AM, Jamey Wright <Jamey.Wright@morgan911.org> wrote:

I just migrated one of my nodes from ACID to DIAL. It is up and running fine but I have a couple of things that need to be addressed.

First, it is no longer showing up on the Allstar Status Pages. When I connected it to one of my other nodes the Allstar site showed the correct info in the bubble display. Is there a command I can run to force registration or is there a logfile that might show errors?

Second, during the install I saw where it was trying to sync to time servers. I block access to time servers external to my network since I have a Stratum 1 NTP server on my network. Where can I change the NTP settings? I am not a Linux guru so a full path is appreciated.

Jamey Wright – WR4JW

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.