I doubt a total reinstall is needed here. I've seen cases where the USB fobs didn't discover correctly when switching from Usbradio to Simple (or vice-versa). I'd suggest trying them one at a time per the directions. Make sure to (W)rite the settings for each fob in radio-tune-menu (or simpleusb-tune-menu) to generate your TUNE configs. It doesn't seem to bother app_rpt if you keep the tune config files in /etc/asterisk for both simpleusb and usbradio. For example: simpleusb_tune_usb2211.conf usbradio_tune_usb2211.conf I've switched back and forth between Simple and Usbradio on a test machine several times. Just make sure that either usbradio.conf OR simpleusb.conf exist in /etc/asterisk, but never both. 73 and GL. Kyle K0KN --- Original Message --- Date: Sun, 22 Jul 2012 22:26:45 -0400 From: Ryan Collier Subject: Re: [App_rpt-users] Simplexusb Message-ID: <CAAoTAmniRNGaueiS4GVj7EGHV2mDodAXicUyYJAEXrUv3+J=vg@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" I have tried your syntax. I have try usbradio again. but I get no txvoice setup. but it keys and rx. I am confused. I don't want to have to reload the whole node but I guess I might have to go that route.