Call Unix Script from Rpt.conf
Good Afternoon. In an ACID distribution, shouldn't this work? A12=cmd,/usr/local/sbin/reboot 4#### The log says [Mar 3 14:29:24] NOTICE[27395]: app_rpt.c:4004 function_cmd: cmd param = /usr/local/sbin/reboot 4####, digitbuf = but the system does not reboot. ...STeve KF5VH
OK, sorry. "cmd" is apparently only available on BeagleBoard. Maybe I can point to the extensions.conf to use "System". ...STeve On 3/3/2016 2:38 PM, Steve Mahler wrote:
Good Afternoon. In an ACID distribution, shouldn't this work?
A12=cmd,/usr/local/sbin/reboot 4####
The log says
[Mar 3 14:29:24] NOTICE[27395]: app_rpt.c:4004 function_cmd: cmd param = /usr/local/sbin/reboot 4####, digitbuf =
but the system does not reboot.
...STeve KF5VH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Steve, That is not true. You might substitute a script for the reboot command to see if it is executing. I know it works in DIAL which is plain vanilla asterisk. Check permissions also Sent via smoke signal (AT&T 4G LTE)
On Mar 3, 2016, at 4:30 PM, Steve Mahler <kizzy@lusfiber.net> wrote:
OK, sorry. "cmd" is apparently only available on BeagleBoard. Maybe I can point to the extensions.conf to use "System". ...STeve
On 3/3/2016 2:38 PM, Steve Mahler wrote: Good Afternoon. In an ACID distribution, shouldn't this work?
A12=cmd,/usr/local/sbin/reboot 4####
The log says
[Mar 3 14:29:24] NOTICE[27395]: app_rpt.c:4004 function_cmd: cmd param = /usr/local/sbin/reboot 4####, digitbuf =
but the system does not reboot.
...STeve KF5VH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The reboot script your are attempting to run does not understand the optional parameters you placed in the line. Rebbot script commences a safe powerdown with restart of the computer. (See also asterisk restart when you don't need to power down the system) See also ??=cop,1 ;warm boot Try this A12=cmd,/usr/local/sbin/reboot ...mike/kb8jnm
Good Afternoon. In an ACID distribution, shouldn't this work?
A12=cmd,/usr/local/sbin/reboot 4####
The log says
[Mar 3 14:29:24] NOTICE[27395]: app_rpt.c:4004 function_cmd: cmd param = /usr/local/sbin/reboot 4####, digitbuf =
but the system does not reboot.
...STeve KF5VH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
mike＠midnighteng.com -
Steve Mahler -
Steve Zingman