At 20:09 28/07/2015, Corey Dean wrote:

Here is how I do it. From a node I will issue a *4 and the node number I want to control. You will then get an audio announcement. Then from this point on the commands entered will work on the other node. When you are done doing the remote control just key up and hit a #. You will get the confirmation beep an you are done.

Okay sound good. just tested this but i never get a connect to the remote node. I can do *3<remote_node> and that links up fine but *4<remote_node> fails to connect ? is there anything that I should add to rpt.conf and thanks for the fast reply nice. Barry

Corey N3FE

Sent from my iPhone

...

On Jul 28, 2015, at 3:05 PM, Barry <g8sau@sidx.org.uk> wrote:

Hi

I have read the http://ohnosec.org/drupal/node/21 pages but could do with a simple tutorial on how to send a command to a remote node

I guess its something like

*4 <local_node> # <remote_node> *<remote_command>

This is just a guess I want to with dtmf on rf send command *51 to a remote node while transmitting to my local RF node

can that be done and how ?

Thanks Barry

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

----- No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6086 / Virus Database: 4401/10323 - Release Date: 07/28/15