Setting up a Pico node with Pickle
I have a Beagle Board with LOX and am trying to set it up but running into a brick wall. I've installed pickle on the SD card, booted the beagle up, logged in and configured the network setting but now what? I've configured a node using the ACID Linux and expected sorta the same thing with it asking me to enter my Allstarlink.org credentials and going from there but after setting up the network I'm just stuck with a command prompt. I've searched through this list server and spend a couple hours on Google but have not been able to find a "How-to" with setting up pickle. Can someone point me in the direction on what I need to do to set up pico/pickle. Eric Moeller N5FOG
doesn't it have a 'nodesetup' or 'nodesetup.sh' just like ACID and/or Limey Linux? I could have sworn I put on there. Jim
Date: Fri, 15 Jun 2012 00:26:11 -0500 From: kc5fog@sbcglobal.net To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Setting up a Pico node with Pickle
I have a Beagle Board with LOX and am trying to set it up but running into a brick wall. I've installed pickle on the SD card, booted the beagle up, logged in and configured the network setting but now what? I've configured a node using the ACID Linux and expected sorta the same thing with it asking me to enter my Allstarlink.org credentials and going from there but after setting up the network I'm just stuck with a command prompt. I've searched through this list server and spend a couple hours on Google but have not been able to find a "How-to" with setting up pickle. Can someone point me in the direction on what I need to do to set up pico/pickle.
Eric Moeller N5FOG
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I'm trying to change to config on a limey linux install, more specifically I'm trying to change the node info to local off the network nodes but every time the box restarts all the changed are reverted back to where I started. Can anyone advise what I'm missing? Tnx and 73 de K0JSC Jeff
svcfg
Date: Fri, 15 Jun 2012 07:49:01 -0600 From: jeff.carrier@rmsmsecurity.com To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Limey Linux Distro
I'm trying to change to config on a limey linux install, more specifically I'm trying to change the node info to local off the network nodes but every time the box restarts all the changed are reverted back to where I started. Can anyone advise what I'm missing?
Tnx and 73 de K0JSC Jeff _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
Eric Moeller -
Jeffrey S. Carrier -
Jim Duuuude