/interface wireless
set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=no \
frequency=5180 frequency-mode=superchannel mode=station-bridge  scan-list=HamWAN \
ssid=HamWAN wireless-protocol=nv2 radio-name=W4LT-HOME
    
    
/interface vlan
add interface=wlan1 l2mtu=2286 name=MGMT-20 vlan-id=20
/interface wireless channels
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
frequency=5920 list=HamWAN name=Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" \
frequency=5900 list=HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" \
frequency=5880 list=HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
frequency=5920 list=HamWAN name=Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" \
frequency=5900 list=HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" \
frequency=5880 list=HamWAN name=Sector3-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
frequency=5920 list=HamWAN name=Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" \
frequency=5900 list=HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" \
frequency=5880 list=HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
frequency=5920 list=HamWAN name=Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" \
frequency=5900 list=HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" \
frequency=5880 list=HamWAN name=Sector3-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
frequency=5920 list=HamWAN name=Sector1-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" \
frequency=5900 list=HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" \
frequency=5880 list=HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
frequency=5920 list=HamWAN name=Sector1-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" \
frequency=5900 list=HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" \
frequency=5880 list=HamWAN name=Sector3-10 width=10

/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/system logging action
set 3 bsd-syslog=yes remote=44.98.254.1

/interface bridge add name=bridge-local
/interface bridge port
add bridge=bridge-local interface=ether1
add bridge=bridge-local interface=wlan1
/ip address 
add address=192.168.88.1/24 comment="default configuration" disabled=yes interface=ether1 \
network=192.168.88.0
/ip dhcp-client
add default-route-distance=0 dhcp-options=hostname,clientid disabled=no interface=MGMT-20
/ip settings
set ip-forward=no
/ip upnp
set allow-disable-external-interface=no
/radius
add address=44.98.254.1
add address=44.98.254.1 secret=RADIUS-PW-56 service=login
/system identity
set name=W4LT-HOME
/system leds
set 0 interface=wlan1
/system logging
add action=remote topics=info,warning,critical,firewall,error
add action=remote topics=info,warning,critical,firewall,error
/system ntp client
set enabled=yes primary-ntp=104.232.3.3 secondary-ntp=45.127.113.2
/system routerboard settings
set cpu-frequency=600MHz
/user aaa
set accounting=yes default-group=read exclude-groups="" interim-update=0s use-radius=yes