Hi guys:

I got the “demo” DynaDish5 client from W9CR, but his password didn’t work, so I reset the device to default.  Figure I may as well learn to configure this thing on my own. However, I think I need some help… J

I have placed it at around 10 feet off the ground for testing.  In WinBox, I see lots of neighborhood AP’s on 5Gigs, especially my own.  My noise floor is -104 to -106 depending on frequency.  My own 5G AP is the “loudest” at a SNR of 45.  Moths other neighborhood devices read around 25-35

I have yet to log any signals on 5.9G – I see many A, P and AP MAC’s on 5.180 through 5.805, but nothing above that.  Several MAC’s have no SSID – not uncommon.  Lots of BHN 5G hits plus the Peace Brazilian Baptist Church network which seems quite busy in the snooper J

I note that there is a configuration text file on the website.  Should I assume that this is a script?  I have changed the notation for my station name – W4LT-1 – But, again, I reset the system to factory default.

I attempted to run this “script” in terminal and execute it.  Is this how I “load” this configuration?  It uploaded into the device, but I don’t know if I executed it or not.

Some help in configuration would be appreciated so I can then move this thing to the roof and see if I can get on either Tampa or St Pete… I may have a tree blocking Tampa, but my shot to St Pete is much clearer… but much farther away.

-lu – W4LT -