Re: [FSG-public] FSG-public Digest, Vol 19, Issue 1
please put me on the list for the demo unit when Lu is done ! Sent from an iPhone 6
On Mar 8, 2017, at 12:00 PM, fsg-public-request@lists.keekles.org wrote:
Send FSG-public mailing list submissions to fsg-public@lists.keekles.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.keekles.org/cgi-bin/mailman/listinfo/fsg-public or, via email, send a message with subject or body 'help' to fsg-public-request@lists.keekles.org
You can reach the person managing the list at fsg-public-owner@lists.keekles.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of FSG-public digest..."
Today's Topics:
1. Ham WAN - Client up and running (Luis V. Romero) 2. Re: Ham WAN - Client up and running (Bryan Fields)
----------------------------------------------------------------------
Message: 1 Date: Tue, 7 Mar 2017 18:09:21 -0500 From: "Luis V. Romero" <lromero56@tampabay.rr.com> To: <fsg-public@lists.keekles.org> Subject: [FSG-public] Ham WAN - Client up and running Message-ID: <000001d29797$db46ecc0$91d4c640$@tampabay.rr.com> Content-Type: text/plain; charset="utf-8"
Hi guys:
I got the "demo" DynaDish5 client from W9CR, but his password didn't work, so I reset the device to default. Figure I may as well learn to configure this thing on my own. However, I think I need some help. :-)
I have placed it at around 10 feet off the ground for testing. In WinBox, I see lots of neighborhood AP's on 5Gigs, especially my own. My noise floor is -104 to -106 depending on frequency. My own 5G AP is the "loudest" at a SNR of 45. Moths other neighborhood devices read around 25-35
I have yet to log any signals on 5.9G - I see many A, P and AP MAC's on 5.180 through 5.805, but nothing above that. Several MAC's have no SSID - not uncommon. Lots of BHN 5G hits plus the Peace Brazilian Baptist Church network which seems quite busy in the snooper :-)
I note that there is a configuration text file on the website. Should I assume that this is a script? I have changed the notation for my station name - W4LT-1 - But, again, I reset the system to factory default.
I attempted to run this "script" in terminal and execute it. Is this how I "load" this configuration? It uploaded into the device, but I don't know if I executed it or not.
Some help in configuration would be appreciated so I can then move this thing to the roof and see if I can get on either Tampa or St Pete. I may have a tree blocking Tampa, but my shot to St Pete is much clearer. but much farther away.
-lu - W4LT -
He bought it from me. I did order two more so I have them at my place. Sent from my iPhone
On Mar 8, 2017, at 12:50, David Krauss <nx4y@verizon.net> wrote:
please put me on the list for the demo unit when Lu is done !
Sent from an iPhone 6
On Mar 8, 2017, at 12:00 PM, fsg-public-request@lists.keekles.org wrote:
Send FSG-public mailing list submissions to fsg-public@lists.keekles.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.keekles.org/cgi-bin/mailman/listinfo/fsg-public or, via email, send a message with subject or body 'help' to fsg-public-request@lists.keekles.org
You can reach the person managing the list at fsg-public-owner@lists.keekles.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of FSG-public digest..."
Today's Topics:
1. Ham WAN - Client up and running (Luis V. Romero) 2. Re: Ham WAN - Client up and running (Bryan Fields)
----------------------------------------------------------------------
Message: 1 Date: Tue, 7 Mar 2017 18:09:21 -0500 From: "Luis V. Romero" <lromero56@tampabay.rr.com> To: <fsg-public@lists.keekles.org> Subject: [FSG-public] Ham WAN - Client up and running Message-ID: <000001d29797$db46ecc0$91d4c640$@tampabay.rr.com> Content-Type: text/plain; charset="utf-8"
Hi guys:
I got the "demo" DynaDish5 client from W9CR, but his password didn't work, so I reset the device to default. Figure I may as well learn to configure this thing on my own. However, I think I need some help. :-)
I have placed it at around 10 feet off the ground for testing. In WinBox, I see lots of neighborhood AP's on 5Gigs, especially my own. My noise floor is -104 to -106 depending on frequency. My own 5G AP is the "loudest" at a SNR of 45. Moths other neighborhood devices read around 25-35
I have yet to log any signals on 5.9G - I see many A, P and AP MAC's on 5.180 through 5.805, but nothing above that. Several MAC's have no SSID - not uncommon. Lots of BHN 5G hits plus the Peace Brazilian Baptist Church network which seems quite busy in the snooper :-)
I note that there is a configuration text file on the website. Should I assume that this is a script? I have changed the notation for my station name - W4LT-1 - But, again, I reset the system to factory default.
I attempted to run this "script" in terminal and execute it. Is this how I "load" this configuration? It uploaded into the device, but I don't know if I executed it or not.
Some help in configuration would be appreciated so I can then move this thing to the roof and see if I can get on either Tampa or St Pete. I may have a tree blocking Tampa, but my shot to St Pete is much clearer. but much farther away.
-lu - W4LT -
participants (2)
-
Bryan Fields, W9CR -
David Krauss