https://flscg.org/2022/06/st-pete-nxdn-and-p25-analog-online/ Basically the NXDN repeater was a 50W repeater that would burn up if used at 50W. We fixed the power amp internal to it and added a 110W external PA. I did some PM's on the combining/duplexing and found it's still within a half dB of what we measured, so that's good. I need to re-install the P25 software on the computer up there, but analog is linked, p25 is just local until this is complete. 73s -- Bryan Fields, W9CR Florida Simulcast Group, Inc.