[Allstar Digital] DMRGateway for the RPi2

[Matthew Pitts]

It shouldn't be that difficult to do; much of the process is editing configuration files and restarting the processes controlled by those files to make sure things are properly configured.

Matthew Pitts
N8OHU

On December 6, 2015 1:03:02 PM EST, Robert Newberry <N1XBM at amsat.org> wrote:
>I just want to clarify, I don't want my hand held, but I want to try
>this.
>I'm pretty new to linux and networking. I've already ordered a RPI2 and
>I'm
>going to use a unmanaged switch and dummy loads to set this all up on
>the
>bench. Once things get going I am going to put this up on the mountain.
>
>I'm probably going to be hitting this list pretty hard. On a plus note
>I
>work with Mototrbo systems at work and I've setup IPSC, Capacity plus,
>and
>Connect plus. So mostly I'll need help with the DMRLINK end of it.
>
>N1XBM
>Apparare Scientor
>Paratus Communicare
>Allstar Node # 27086, 41540, 41812, 42086
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Allstar-Digital mailing list
>Allstar-Digital at lists.keekles.org
>http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151206/eb8f0d18/attachment.html>