[Allstar Digital] DMR to AllStar

Wed Dec 9 20:44:24 EST 2015

We are all correct. I guess what I'm saying is ASL node 2100 isn't
monitoring the reflector to pickup our noise.

http://ham-dmr.de/reflector_status.php?r=4639

David

On Wed, Dec 9, 2015 at 5:16 PM, Michael Hebert <mhebert1975 at gmail.com>
wrote:

> Steve,
>
> You are correct. I setup mine up Monday night and that is the way it
> worked.
>
> Michael KD5DFB
>
> On Wed, Dec 9, 2015 at 5:53 PM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> David,
>> If you notice, your radio is programmed for CC1, TS2, TG9 and then you
>> say, out TG4639. With the DV4M software, you can select which reflector you
>> connect to. In other words you use the DV4M software to choose the Master
>> AND reflector number.
>>
>> The way we are connected to DMRPlus is the same, we select the Master we
>> stay connected to. The difference is how we choose which reflector to
>> connect to. If I want Ref 4639, I have in my contact list 4639, I press
>> PTT, release PTT and switch back to TG9, I will hear the voice confirmation
>> "reflector 4639" I'm transmitting TG9 and receiving TG9. I believe that you
>> can do the same thing with a DV4M. I'll try it when I get a chance.
>>
>> 73, Steve N4IRS
>>
>> On 12/09/2015 03:11 PM, David KE6UPI wrote:
>>
>> Hey Steve,
>>
>> Right my DMR radio is set to Color 1 TS 2 and TG9 that passes through to
>> my DV4Mini and software to the DMR master "Master-USA-NE-VA" then out
>> TG4639 "Nationwide".
>>
>> David
>>
>> On Wed, Dec 9, 2015 at 11:37 AM, Steve Zingman <szingman at msgstor.com>
>> wrote:
>>
>>> David,
>>> The way a reflector works is you talk on TG9 all the time. You kerckunk
>>> 4639 to select reflector 4639. So audio is only passed on TG9.
>>>
>>> Steve
>>>
>>>
>>>
>>> Sent via smoke signal (AT&T 4G LTE)
>>>
>>>
>>> -------- Original message --------
>>> From: David KE6UPI <dshaw at ke6upi.com>
>>> Date: 12/09/2015 2:25 PM (GMT-05:00)
>>> To: Digital linking using Asterisk and app_rpt <
>>> <allstar-digital at lists.keekles.org>allstar-digital at lists.keekles.org>
>>> Subject: Re: [Allstar Digital] DMR to AllStar
>>>
>>> Thanks Mike that does help.. Back to the other email.. So when we use
>>> the DV4Mini software we go out talkgroup 4639 and 4639 is not listed
>>> in _tg_filter = 2,3,13,3174,3777215,3100,9,9998,3112.
>>>
>>> Anyways thanks, David
>>>
>>> On Wed, Dec 9, 2015 at 10:02 AM, Steve Zingman < <szingman at msgstor.com>
>>> szingman at msgstor.com> wrote:
>>>
>>>> David,
>>>> See if this helps.
>>>> <https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.pdf>
>>>> <https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.pdf>
>>>>
>>>> On 12/9/2015 11:44 AM, David KE6UPI wrote:
>>>>
>>>> Thanks Mike for the reply.
>>>>
>>>> My setup right now is DV4Mini and the Control Panel on my PC. But I
>>>> really want to understand and help with the Allstar to DMR if I can.. I'm
>>>> not a programmer and I'm very new to DMR. So the best I can do would be
>>>> that guy to help test maybe. I can open my firewall to one of my RPi 2 on a
>>>> 2nd network here at home so you could connect and play on the RPi 2.
>>>>
>>>> How are you connecting DMR to apt_rpt. Are you using chan_usrp? If so
>>>> can you share your setup?
>>>>
>>>> Thanks again Mike
>>>>
>>>> David
>>>>
>>>> On Wed, Dec 9, 2015 at 8:10 AM, Mike Zingman < <mike.zingman at gmail.com>
>>>> mike.zingman at gmail.com> wrote:
>>>>
>>>>> David,
>>>>>
>>>>> The ambe_audio.py is using a list of Talk Groups (TG).  When ever any
>>>>> of the TGs in the list are encountered, the AMBE will be decoded and passed
>>>>> to Allstar.  The current list of TGs is defined in ambe_audio.cfg:
>>>>>
>>>>> _tg_filter = 2,3,13,3174,3777215,3100,9,9998,3112
>>>>>
>>>>> So, node 2100 is looking for all of the above and will re-transmit
>>>>> them on Allstar.  Looking deeper, we see TG9, but what reflector?  We are
>>>>> currently pointing our TG9 routes to reflector 4639 as you can see here:
>>>>>
>>>>> http://174.36.222.36/
>>>>>
>>>>> Now, with that said, I did notice last night that when I was playing
>>>>> on TG9/4639 and I was not seeing myself on the log output of DMRLink.
>>>>> Steve may have turned that off for a moment or there was a connectivity
>>>>> problem, but you should be able to use your DV4Mini with standard control
>>>>> panel and transmit on 4639 and hear yourself on 2100.
>>>>>
>>>>> Mike
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Dec 9, 2015 at 7:40 AM, David KE6UPI < <dshaw at ke6upi.com>
>>>>> dshaw at ke6upi.com> wrote:
>>>>>
>>>>>> Hello Mike, I have some questions about the DV4Mini I hope you could
>>>>>> answer for me. When I have it setup I going seem to get the Talkgroup 9.
>>>>>> I'm using a MD380 radio and would like to get on North America so I can
>>>>>> hear myself on the Allstar node 2100. I have North America programmed on my
>>>>>> radio.
>>>>>>
>>>>>> Any help would be great.
>>>>>>
>>>>>> David
>>>>>> KE6UPI
>>>>>>
>>>>>> On Sun, Dec 6, 2015 at 11:12 AM, Mike Zingman <
>>>>>> <mike.zingman at gmail.com>mike.zingman at gmail.com> wrote:
>>>>>>
>>>>>>> So we have a different thread for this device..
>>>>>>>
>>>>>>> From my perspective the dv4m is an interesting widget.  The hardware
>>>>>>> is not special (it has been done before) but it is solid and inexpensive.
>>>>>>> It offers a fully digital interface to DMR from the RF side.  With the
>>>>>>> published interface (see
>>>>>>> <http://dv4m.ham-dmr.ch/Dokumentation/TechnicalDocs/dv4mini_interface.pdf>
>>>>>>> http://dv4m.ham-dmr.ch/Dokumentation/TechnicalDocs/dv4mini_interface.pdf)
>>>>>>> you can fully control the radio.
>>>>>>>
>>>>>>> The challenge is to use the raw I/O commands and build up an OPEN
>>>>>>> system that will let us experiment.  Towards that end I have started a
>>>>>>> framework that lets me communicate with the dongle.  This was fairly easy
>>>>>>> and is currently sending and receiving DMR frames from my host software.
>>>>>>>
>>>>>>> I have also added code to the host to send and receive point to
>>>>>>> point packets of DMR frames and will be testing this soon.  I have more
>>>>>>> work to do here to finish the frame decoder, which will be used to better
>>>>>>> synchronize the two peers.
>>>>>>>
>>>>>>> As you might expect, I have several different projects all in the
>>>>>>> works, so multitasking this at the moment.  My eventual goal is to have a
>>>>>>> generic framework that I can then use to connect any source with any sinc
>>>>>>> (read local DMR subscriber radio with the world).
>>>>>>>
>>>>>>> So, why reinvent the wheel?  The dv4m already connects with the
>>>>>>> DMRPlus and other networks.  What more could a ham want?  The easy answer:
>>>>>>> to experiment.  The current code is not *open* and can not be used
>>>>>>> as the basis for other projects.  In order to make this happen, open source
>>>>>>> is required.  All of the code I am working on for the dv4m will be
>>>>>>> published so others can build upon it.
>>>>>>>
>>>>>>>
>>>>>>> Mike
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Allstar-Digital mailing list
>>>>>>> <Allstar-Digital at lists.keekles.org>Allstar-Digital at lists.keekles.org
>>>>>>> <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital>
>>>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Allstar-Digital mailing list
>>>>>> Allstar-Digital at lists.keekles.org
>>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Allstar-Digital mailing list
>>>>> Allstar-Digital at lists.keekles.org
>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Allstar-Digital mailing list
>>>> Allstar-Digital at lists.keekles.org
>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151209/46e9627f/attachment.html>