[Allstar Digital] DMR to AllStar

Wed Dec 9 20:16:36 EST 2015

Steve,

You are correct. I setup mine up Monday night and that is the way it worked.

Michael KD5DFB

On Wed, Dec 9, 2015 at 5:53 PM, Steve Zingman <szingman at msgstor.com> wrote:

> David,
> If you notice, your radio is programmed for CC1, TS2, TG9 and then you
> say, out TG4639. With the DV4M software, you can select which reflector you
> connect to. In other words you use the DV4M software to choose the Master
> AND reflector number.
>
> The way we are connected to DMRPlus is the same, we select the Master we
> stay connected to. The difference is how we choose which reflector to
> connect to. If I want Ref 4639, I have in my contact list 4639, I press
> PTT, release PTT and switch back to TG9, I will hear the voice confirmation
> "reflector 4639" I'm transmitting TG9 and receiving TG9. I believe that you
> can do the same thing with a DV4M. I'll try it when I get a chance.
>
> 73, Steve N4IRS
>
> On 12/09/2015 03:11 PM, David KE6UPI wrote:
>
> Hey Steve,
>
> Right my DMR radio is set to Color 1 TS 2 and TG9 that passes through to
> my DV4Mini and software to the DMR master "Master-USA-NE-VA" then out
> TG4639 "Nationwide".
>
> David
>
> On Wed, Dec 9, 2015 at 11:37 AM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> David,
>> The way a reflector works is you talk on TG9 all the time. You kerckunk
>> 4639 to select reflector 4639. So audio is only passed on TG9.
>>
>> Steve
>>
>>
>>
>> Sent via smoke signal (AT&T 4G LTE)
>>
>>
>> -------- Original message --------
>> From: David KE6UPI <dshaw at ke6upi.com>
>> Date: 12/09/2015 2:25 PM (GMT-05:00)
>> To: Digital linking using Asterisk and app_rpt <
>> <allstar-digital at lists.keekles.org>allstar-digital at lists.keekles.org>
>> Subject: Re: [Allstar Digital] DMR to AllStar
>>
>> Thanks Mike that does help.. Back to the other email.. So when we use the
>> DV4Mini software we go out talkgroup 4639 and 4639 is not listed
>> in _tg_filter = 2,3,13,3174,3777215,3100,9,9998,3112.
>>
>> Anyways thanks, David
>>
>> On Wed, Dec 9, 2015 at 10:02 AM, Steve Zingman < <szingman at msgstor.com>
>> szingman at msgstor.com> wrote:
>>
>>> David,
>>> See if this helps.
>>> <https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.pdf>
>>> <https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.pdf>
>>>
>>> On 12/9/2015 11:44 AM, David KE6UPI wrote:
>>>
>>> Thanks Mike for the reply.
>>>
>>> My setup right now is DV4Mini and the Control Panel on my PC. But I
>>> really want to understand and help with the Allstar to DMR if I can.. I'm
>>> not a programmer and I'm very new to DMR. So the best I can do would be
>>> that guy to help test maybe. I can open my firewall to one of my RPi 2 on a
>>> 2nd network here at home so you could connect and play on the RPi 2.
>>>
>>> How are you connecting DMR to apt_rpt. Are you using chan_usrp? If so
>>> can you share your setup?
>>>
>>> Thanks again Mike
>>>
>>> David
>>>
>>> On Wed, Dec 9, 2015 at 8:10 AM, Mike Zingman < <mike.zingman at gmail.com>
>>> mike.zingman at gmail.com> wrote:
>>>
>>>> David,
>>>>
>>>> The ambe_audio.py is using a list of Talk Groups (TG).  When ever any
>>>> of the TGs in the list are encountered, the AMBE will be decoded and passed
>>>> to Allstar.  The current list of TGs is defined in ambe_audio.cfg:
>>>>
>>>> _tg_filter = 2,3,13,3174,3777215,3100,9,9998,3112
>>>>
>>>> So, node 2100 is looking for all of the above and will re-transmit them
>>>> on Allstar.  Looking deeper, we see TG9, but what reflector?  We are
>>>> currently pointing our TG9 routes to reflector 4639 as you can see here:
>>>>
>>>> http://174.36.222.36/
>>>>
>>>> Now, with that said, I did notice last night that when I was playing on
>>>> TG9/4639 and I was not seeing myself on the log output of DMRLink.  Steve
>>>> may have turned that off for a moment or there was a connectivity problem,
>>>> but you should be able to use your DV4Mini with standard control panel and
>>>> transmit on 4639 and hear yourself on 2100.
>>>>
>>>> Mike
>>>>
>>>>
>>>>
>>>> On Wed, Dec 9, 2015 at 7:40 AM, David KE6UPI < <dshaw at ke6upi.com>
>>>> dshaw at ke6upi.com> wrote:
>>>>
>>>>> Hello Mike, I have some questions about the DV4Mini I hope you could
>>>>> answer for me. When I have it setup I going seem to get the Talkgroup 9.
>>>>> I'm using a MD380 radio and would like to get on North America so I can
>>>>> hear myself on the Allstar node 2100. I have North America programmed on my
>>>>> radio.
>>>>>
>>>>> Any help would be great.
>>>>>
>>>>> David
>>>>> KE6UPI
>>>>>
>>>>> On Sun, Dec 6, 2015 at 11:12 AM, Mike Zingman <
>>>>> <mike.zingman at gmail.com>mike.zingman at gmail.com> wrote:
>>>>>
>>>>>> So we have a different thread for this device..
>>>>>>
>>>>>> From my perspective the dv4m is an interesting widget.  The hardware
>>>>>> is not special (it has been done before) but it is solid and inexpensive.
>>>>>> It offers a fully digital interface to DMR from the RF side.  With the
>>>>>> published interface (see
>>>>>> <http://dv4m.ham-dmr.ch/Dokumentation/TechnicalDocs/dv4mini_interface.pdf>
>>>>>> http://dv4m.ham-dmr.ch/Dokumentation/TechnicalDocs/dv4mini_interface.pdf)
>>>>>> you can fully control the radio.
>>>>>>
>>>>>> The challenge is to use the raw I/O commands and build up an OPEN
>>>>>> system that will let us experiment.  Towards that end I have started a
>>>>>> framework that lets me communicate with the dongle.  This was fairly easy
>>>>>> and is currently sending and receiving DMR frames from my host software.
>>>>>>
>>>>>> I have also added code to the host to send and receive point to point
>>>>>> packets of DMR frames and will be testing this soon.  I have more work to
>>>>>> do here to finish the frame decoder, which will be used to better
>>>>>> synchronize the two peers.
>>>>>>
>>>>>> As you might expect, I have several different projects all in the
>>>>>> works, so multitasking this at the moment.  My eventual goal is to have a
>>>>>> generic framework that I can then use to connect any source with any sinc
>>>>>> (read local DMR subscriber radio with the world).
>>>>>>
>>>>>> So, why reinvent the wheel?  The dv4m already connects with the
>>>>>> DMRPlus and other networks.  What more could a ham want?  The easy answer:
>>>>>> to experiment.  The current code is not *open* and can not be used
>>>>>> as the basis for other projects.  In order to make this happen, open source
>>>>>> is required.  All of the code I am working on for the dv4m will be
>>>>>> published so others can build upon it.
>>>>>>
>>>>>>
>>>>>> Mike
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Allstar-Digital mailing list
>>>>>> <Allstar-Digital at lists.keekles.org>Allstar-Digital at lists.keekles.org
>>>>>> <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital>
>>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Allstar-Digital mailing list
>>>>> Allstar-Digital at lists.keekles.org
>>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Allstar-Digital mailing list
>>>> Allstar-Digital at lists.keekles.org
>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151209/9f51621e/attachment.html>