[Allstar Digital] Starting on DMRlink

[Mike Zingman]

1) in /etc/asterisk/modules.conf enable usrp as

load => chan_usrp.so

2) in rpt.conf create a stanza like:

[1999]

rxchannel = usrp/192.168.1.182:34001:32001

duplex = 2

scheduler=scheduler

functions = functions-repeater

hangtime=0

authlevel = 0


Where the address and ports are configured to your network.

3) in rpt.conf add your node

[nodes]

1999 = radio at 127.0.0.1:4570/1999,NONE


Now chan_usrp is ready to go.

On Fri, Dec 11, 2015 at 12:56 PM, David KE6UPI <dshaw at ke6upi.com> wrote:

> Hello Robert, If you find out how to configure the Chan_USRP and asterisk
> please let me know.
>
> David
>
> On Fri, Dec 11, 2015 at 9:28 AM, Robert Newberry <N1XBM at amsat.org> wrote:
>
>> Is the "readme.md" the documentation I should be reading for setting up
>> DMRlink?
>>
>> I've also been scanning dmrlink_SAMPLE.cfg for how to setup a parrot tg.
>>
>> Thank you
>>
>> N1XBM
>> Apparare Scientor
>> Paratus Communicare
>> Allstar Node # 27086, 41540, 41812, 42086, 42658
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151211/6ab3c311/attachment.html>