[Allstar Digital] Starting on DMRlink

[David KE6UPI]

Thanks Mike

On Fri, Dec 11, 2015 at 10:03 AM, Mike Zingman <mike.zingman at gmail.com>
wrote:

> 1) in /etc/asterisk/modules.conf enable usrp as
>
> load => chan_usrp.so
>
> 2) in rpt.conf create a stanza like:
>
> [1999]
>
> rxchannel = usrp/192.168.1.182:34001:32001
>
> duplex = 2
>
> scheduler=scheduler
>
> functions = functions-repeater
>
> hangtime=0
>
> authlevel = 0
>
>
> Where the address and ports are configured to your network.
>
> 3) in rpt.conf add your node
>
> [nodes]
>
> 1999 = radio at 127.0.0.1:4570/1999,NONE
>
>
> Now chan_usrp is ready to go.
>
> On Fri, Dec 11, 2015 at 12:56 PM, David KE6UPI <dshaw at ke6upi.com> wrote:
>
>> Hello Robert, If you find out how to configure the Chan_USRP and asterisk
>> please let me know.
>>
>> David
>>
>> On Fri, Dec 11, 2015 at 9:28 AM, Robert Newberry <N1XBM at amsat.org> wrote:
>>
>>> Is the "readme.md" the documentation I should be reading for setting up
>>> DMRlink?
>>>
>>> I've also been scanning dmrlink_SAMPLE.cfg for how to setup a parrot tg.
>>>
>>> Thank you
>>>
>>> N1XBM
>>> Apparare Scientor
>>> Paratus Communicare
>>> Allstar Node # 27086, 41540, 41812, 42086, 42658
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151211/17dbe1a9/attachment.html>