[Allstar Digital] PiDV / DV3000

[Michael Hebert]

It is up and running! If anyone wants to connect to node 28304

On Fri, Dec 18, 2015 at 7:29 PM, Steve Zingman <szingman at msgstor.com> wrote:

> Configure dmrlink.cfg in /opt/dmrlink/ambe_audio as a master
>     Configure the repeater to point at the Pi as a peer.
>         cd /opt/dmrlink/ambe_audio
>         Test it by running python dmrlink.py in ambe_audio Watch the log
>     stop dmrlink.py
>     If you have rebooted DMRGateway should be running.
>         Check it with ps ax | grep DMRGateway
>             If not start it with /usr/local/bin/DMRGateway &
>         Make sure asterisk is running and connect a node to it so you can
> hear it.
>     start python ambe_audio.py
> You should now have a audio path from the DMR repeater TO Asterisk NOT
> Asterisk to DMRGateway (will come later)
>
> Ask if you need more.
>
> On 12/18/2015 08:16 PM, Michael Hebert wrote:
>
> Thanks Steve.
>
> Still trying to wrap my head around the DMRGateway diagram.
>
> Hopefully, I can give you a short run down of how I think it should run it
>
> 1. Configure dmrlink in /opt/dmrlink/ambe_audio. It will need to have a
> master for the repeater to peer with
> 2. I think the default ambe_audio.cfg should work
> 3. I think the default DMRGateway.ini should work
> 3. Run DMRGateway. Are you running as a process? DMRGateway &
> 4. Run python2 ambe_audio.py &
> 5. Everything should be running, test audio to and from DMR and AllStar
>
> Michael KD5DFB
>
>
> On Fri, Dec 18, 2015 at 6:58 PM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> Michael,
>> You are good, that's a warning because of the changes from init.d to
>> systemd it is expected and normal.
>>
>> Steve
>>
>> On 12/18/2015 07:55 PM, Michael Hebert wrote:
>>
>> Steve,
>>
>> I received my PiDV this afternoon. I was going thru and making sure I had
>> all the dependencies taken care. I notice there was a problem
>> with update-rc.d AMBEserverGPIO start 50 2 3 4 5
>>
>> root at repeater:/srv/DV3000# cd /etc/init.d
>> root at repeater:/etc/init.d# update-rc.d AMBEserverGPIO start 50 2 3 4 5
>> update-rc.d: warning: start and stop actions are no longer supported;
>> falling back to defaults
>>
>> I hope to have everything up and running tonight. I will have node 28304
>> link to my dmr repeater.
>>
>> Michael KD5DFB
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>
>
> _______________________________________________
> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151218/21688566/attachment.html>