[Allstar Digital] playback help

[Steve Zingman]

Don't copy it anywhere. The directory structure is setup to allow more 
then one instance. Run it from the playback directory. Create a peer 
dmrlink.cfg in the playback directory.

On 12/22/2015 10:03 PM, Robert Newberry wrote:
> So I'm about to turn in for the evening. So far tonight I've set my my 
> RPI running DMRlink as the master. I then programmed my repeater to 
> peer to my RPI. By setting the log file to DEBUG I can see my 
> repeater's IP and getting the "keep-alives"
>
> The two things I have left...I think before I plunk down money for a 
> DV3000 is getting a succesful echo test. What I did was copy 
> playback_config.py, and playback.py to /opt/dmrlink/bridge. When I try 
> to run it I get an error about basicly it can't listen on a port 
> 50000. Not sure maybe I've executed this wrong.
>
> The other thing I have not attempted yet, is now that my repeater is 
> peer'ed I should be able to setup my bridge rules and use my DMR HT 
> while listening to 2100.
>
> Is there anyone who has gotten echo up and running that might be 
> willing to lend a hand?
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151222/08652f60/attachment.html>