[Allstar Digital] DMR-DSTAR bridge

[Matthew Pitts]

Steve,

The way I read it, it sends the uLaw audio stream out the same network connection everything else is on, so you need to know what port and IP address to listen on.

Matthew Pitts
N8OHU 

On November 4, 2015 1:49:47 PM EST, Steve Zingman <szingman at msgstor.com> wrote:
>Not a flame. If you can get ulaw audio out of a Hytera repeater, you 
>don't need the D-Star channel driver.
>
>These 2 github projects look like they would provide enough info to
>grab 
>AMBE off a DMR+ master and send it to AllStar through the USRP channel 
>driver.
><https://github.com/nonoo/dmrshark> and 
><https://github.com/on4akh/linDmrMaster>
>
>Steve
>
>On 11/4/2015 1:42 PM, Robert Newberry wrote:
>>
>> I'm flying by the seat of my pants. So please don't flame me. It
>looks 
>> like you can tell the hytera repeater to output ulaw analog audio. 
>> Once that's achieved you should be able to send it into the dstar 
>> channel driver?
>>
>> ...no?
>>
>> I'm working hard to understand this stuff.
>>
>> N1XBM
>> Apparare Scientor
>> Paratus Communicare
>> Allstar Node # 27086, 41540, 41812, 42086
>>
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Allstar-Digital mailing list
>Allstar-Digital at lists.keekles.org
>http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20151104/65fa7875/attachment.html>