[Allstar Digital] Install problem dmrgateway

Sun Feb 28 12:53:48 EST 2016

Check for subscriber_ids.csv in /opt/darling

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM at amsat.org> wrote:

OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a
couple of instances. I went thru and killed duplicate processes and that
errror cleared up here is the results of netstat -unap

root at repeater:~# netstat -unap
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address
State       PID/Program name
udp        0      0 0.0.0.0:34001           0.0.0.0:*
279/DMRGateway
udp        0      0 127.0.0.1:32001         0.0.0.0:*
277/asterisk
udp        0      0 0.0.0.0:31000           0.0.0.0:*
279/DMRGateway
udp        0      0 0.0.0.0:50001           0.0.0.0:*
234/python
udp        0      0 0.0.0.0:2460            0.0.0.0:*
221/AMBEserverGPIO
udp        0      0 0.0.0.0:4569            0.0.0.0:*
277/asterisk
udp        0      0 0.0.0.0:52307           0.0.0.0:*
234/python
udp        0      0 0.0.0.0:53900           0.0.0.0:*
234/python
udp        0      0 0.0.0.0:49823           0.0.0.0:*
279/DMRGateway

ambe_audio.py will not run I still get this error.

File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
    from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3,
hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info,
reread_subscribers
ImportError: cannot import name get_subscriber_info

I must be missing a file? by my own screwing up of coarse!

On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman at msgstor.com>
wrote:

> netstat-unap
>
> Sent via smoke signal (AT&T 4G LTE)
>
> On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM at amsat.org> wrote:
>
> So I noticed that ambe_audio.py and bridge.py were not comming up at
> bootup. I ran ./rc.local and saw it was permission denied. I corrected
> that. This is what I get.
>
> root at repeater:/etc# Traceback (most recent call last):
>   File "/opt/dmrlink/bridge/bridge.py", line 273, in <module>
>     reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'],
> networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP'])
>   File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py",
> line 374, in listenUDP
>     p.startListening()
>   File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line
> 175, in startListening
>     self._bindSocket()
>   File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line
> 195, in _bindSocket
>     raise error.CannotListenError(self.interface, self.port, le)
> twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307:
> [Errno 98] Address already in use.
> Traceback (most recent call last):
>   File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
>     from dmrlink import IPSC, NETWORK, networks, logger, int_id,
> hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH,
> get_subscriber_info, reread_subscribers
> ImportError: cannot import name get_subscriber_info
>
>
> So I think the first problem where it says it cant listen on 0.0.0.0:52307
> that has to do with my peer connection to brandmiester. I've looked at
> dmrlink.cfg in both ambe_audio and bridge directories. I can not see where
> that port is duplicated.
>
> The second issuse about can not import subscriber_info, I am not sure
> where to look for that.
>
> On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> I checked the notes. Above the move of the ini is a cd DMRGateway
>>
>> Sent via smoke signal (AT&T 4G LTE)
>>
>> On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM at amsat.org> wrote:
>>
>> So I'm following the instructions from a previous email.
>>
>> I executed the cp command from /srv
>>
>> cp DMRGateway.armv7 DMRGateway
>>
>> I get no such file or directory. I can however see DMRGateway.armv7 in
>> /srv/DMRGateway
>>
>> Am I just in the wrong directory?
>>
>> N1XBM
>> Apparare Scientor
>> Paratus Communicare
>> Allstar Node # 27086, 41540, 41812, 42086, 42658
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital at lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160228/50ec8a7c/attachment.html>