[Allstar Digital] Install problem dmrgateway
Robert Newberry
N1XBM at amsat.org
Sun Feb 28 12:59:51 EST 2016
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks
ok, I see a bunch of IDs and names. I noticed that its not executable.
On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman at msgstor.com>
wrote:
> Check for subscriber_ids.csv in /opt/darling
>
> Sent via smoke signal (AT&T 4G LTE)
>
> On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM at amsat.org> wrote:
>
> OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a
> couple of instances. I went thru and killed duplicate processes and that
> errror cleared up here is the results of netstat -unap
>
> root at repeater:~# netstat -unap
> Active Internet connections (servers and established)
> Proto Recv-Q Send-Q Local Address Foreign Address
> State PID/Program name
> udp 0 0 0.0.0.0:34001 0.0.0.0:*
> 279/DMRGateway
> udp 0 0 127.0.0.1:32001 0.0.0.0:*
> 277/asterisk
> udp 0 0 0.0.0.0:31000 0.0.0.0:*
> 279/DMRGateway
> udp 0 0 0.0.0.0:50001 0.0.0.0:*
> 234/python
> udp 0 0 0.0.0.0:2460 0.0.0.0:*
> 221/AMBEserverGPIO
> udp 0 0 0.0.0.0:4569 0.0.0.0:*
> 277/asterisk
> udp 0 0 0.0.0.0:52307 0.0.0.0:*
> 234/python
> udp 0 0 0.0.0.0:53900 0.0.0.0:*
> 234/python
> udp 0 0 0.0.0.0:49823 0.0.0.0:*
> 279/DMRGateway
>
> ambe_audio.py will not run I still get this error.
>
> File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
> from dmrlink import IPSC, NETWORK, networks, logger, int_id,
> hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH,
> get_subscriber_info, reread_subscribers
> ImportError: cannot import name get_subscriber_info
>
> I must be missing a file? by my own screwing up of coarse!
>
>
> On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> netstat-unap
>>
>> Sent via smoke signal (AT&T 4G LTE)
>>
>> On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM at amsat.org> wrote:
>>
>> So I noticed that ambe_audio.py and bridge.py were not comming up at
>> bootup. I ran ./rc.local and saw it was permission denied. I corrected
>> that. This is what I get.
>>
>> root at repeater:/etc# Traceback (most recent call last):
>> File "/opt/dmrlink/bridge/bridge.py", line 273, in <module>
>> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'],
>> networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP'])
>> File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py",
>> line 374, in listenUDP
>> p.startListening()
>> File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line
>> 175, in startListening
>> self._bindSocket()
>> File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line
>> 195, in _bindSocket
>> raise error.CannotListenError(self.interface, self.port, le)
>> twisted.internet.error.CannotListenError: Couldn't listen on
>> 0.0.0.0:52307: [Errno 98] Address already in use.
>> Traceback (most recent call last):
>> File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
>> from dmrlink import IPSC, NETWORK, networks, logger, int_id,
>> hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH,
>> get_subscriber_info, reread_subscribers
>> ImportError: cannot import name get_subscriber_info
>>
>>
>> So I think the first problem where it says it cant listen on
>> 0.0.0.0:52307 that has to do with my peer connection to brandmiester.
>> I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can
>> not see where that port is duplicated.
>>
>> The second issuse about can not import subscriber_info, I am not sure
>> where to look for that.
>>
>> On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman at msgstor.com>
>> wrote:
>>
>>> I checked the notes. Above the move of the ini is a cd DMRGateway
>>>
>>> Sent via smoke signal (AT&T 4G LTE)
>>>
>>> On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM at amsat.org> wrote:
>>>
>>> So I'm following the instructions from a previous email.
>>>
>>> I executed the cp command from /srv
>>>
>>> cp DMRGateway.armv7 DMRGateway
>>>
>>> I get no such file or directory. I can however see DMRGateway.armv7 in
>>> /srv/DMRGateway
>>>
>>> Am I just in the wrong directory?
>>>
>>> N1XBM
>>> Apparare Scientor
>>> Paratus Communicare
>>> Allstar Node # 27086, 41540, 41812, 42086, 42658
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160228/582d6355/attachment.html>
More information about the Allstar-Digital
mailing list