[Allstar Digital] MMDVM limited DMR success

[Steve Zingman]

When I looked a at a XPR8300 Mototrbo repeater on the station monitor, 
it's right at 3 KHz.
Right now the receiver is in wide band. I'll try narrow later today.

Steve

On 01/17/2016 04:02 PM, Corey Dean wrote:
> Wideband?  Instead of using my r100, I think I will use a couple of m120's.  If nArrow I will try a pair of 1225's.
>
> Sent from my iPhone
>
>> On Jan 17, 2016, at 3:41 PM, Steve Zingman <szingman at msgstor.com> wrote:
>>
>> I had my first QSO using the MMDVM on DMR. Using a pair of Tait 20XX mobile radios and the MMDVM.
>> Current firmware and MMDVMHost software running a Raspberry Pi2. Installed and compiled from the G4KLX repository on github.
>>
>> 73, Steve N4IRS
>> -- 
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic