[Allstar Digital] DMRGateway

[Robert Newberry]

So I followed instructions from previous emails.

I first went to my rpt.conf and did this

rxchannel = usrp/127.0.0.1:34001:32001

Then

Configure dmrlink.cfg in /opt/dmrlink/ambe_audio as a master
    Configure the repeater to point at the Pi as a peer.
        cd /opt/dmrlink/ambe_audio
        Test it by running python dmrlink.py in ambe_audio Watch the log
    stop dmrlink.py
    If you have rebooted DMRGateway should be running.
        Check it with ps ax | grep DMRGateway
            If not start it with /usr/local/bin/DMRGateway &
        Make sure asterisk is running and connect a node to it so you can
hear it.
    start python ambe_audio.py

Everything looks OK on the output, other than not hearing myself. I am also
using TS2 TG2 which by the looks of the default ambe_audio.cfg in
/opt/dmrlink/ambe_audio has TG2 in the filter.

Is there any other ports I need to set? It looks like most things are set
default.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160128/9458a399/attachment.html>