[Allstar Digital] DMRGateway

[Steve Zingman]

usrp channel driver enabled in modules.conf?

On 01/29/2016 09:41 PM, Robert Newberry wrote:
> root at repeater:/opt/dmrlink/ambe_audio# python ambe_audio.py
> INFO DMRlink 'ambe_audio.py' (c) 2015 N0MJS & the K0USY Group - SYSTEM 
> STARTING...
> INFO (N1XBM_MASTER) IPSC Instance Created: 54321, 0.0.0.0:50001 
> <http://0.0.0.0:50001>
> DMRLink ambe server
> Send UDP frames to DMR gateway 127.0.0.1:1234 <http://127.0.0.1:1234>
> Remote control is listening on: repeater 1235
> INFO (N1XBM_MASTER) Master Registration Packet Received from peer 
> 312307, 192.168.0.202:50002 <http://192.168.0.202:50002>
> Voice Transmission Start on TS 2 and TG Local (2) from N1XBM
> Voice Transmission End 5.22 seconds
>
>
> On Fri, Jan 29, 2016 at 9:36 PM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     set dmrlink.cfg to INFO and output to console
>     start ambe_audio.py in the foreground.
>     Talk on repeater
>     What do you get on the screen?
>     copy and paste it to message.
>
>
>     On 01/29/2016 09:32 PM, Robert Newberry wrote:
>>
>>     So I looked a DMRGateway.ini under /etc. The ports match what I
>>     see in DMRGateway.pdf. All of the IPs are 127.0.0.1 which I
>>     believe is correct.
>>
>>     I confirmed that AMBEserverGPIO is running.
>>
>>     As far as I know to test this I go to /opt/dmrlink/ambe_audio 
>>     then type python ambe_audio.py
>>
>>     If Everything is right, I should hear myself in my node. I am
>>     connected to my node using iaxrpt.
>>
>>     In ambe_audio.cfg what is the remote control port? Default is
>>     1235 the gateway port is 1234 which I think is the port between
>>     dmrlink and dmrgateway.
>>
>>     N1XBM
>>     Apparare Scientor
>>     Paratus Communicare
>>     Allstar Node # 27086, 41540, 41812, 42086, 42658
>>
>>     On Jan 29, 2016 5:43 AM, "Steve Zingman" <szingman at msgstor.com
>>     <mailto:szingman at msgstor.com>> wrote:
>>
>>         Is AMBEserverGPIO running? Have you tested it for proper
>>         operation?
>>         is DMRGateway running? Are the settings in DMRGateway.ini
>>         correct?
>>
>>
>>
>>
>>         On 01/28/2016 10:16 PM, Robert Newberry wrote:
>>>         So I followed instructions from previous emails.
>>>
>>>         I first went to my rpt.conf and did this
>>>
>>>         rxchannel = usrp/127.0.0.1:34001:32001
>>>
>>>         Then
>>>
>>>         Configure dmrlink.cfg in /opt/dmrlink/ambe_audio as a master
>>>             Configure the repeater to point at the Pi as a peer.
>>>                 cd /opt/dmrlink/ambe_audio
>>>                 Test it by running python dmrlink.py in ambe_audio
>>>         Watch the log
>>>             stop dmrlink.py
>>>             If you have rebooted DMRGateway should be running.
>>>                 Check it with ps ax | grep DMRGateway
>>>                     If not start it with /usr/local/bin/DMRGateway &
>>>                 Make sure asterisk is running and connect a node to
>>>         it so you can hear it.
>>>             start python ambe_audio.py
>>>
>>>         Everything looks OK on the output, other than not hearing
>>>         myself. I am also using TS2 TG2 which by the looks of the
>>>         default ambe_audio.cfg in /opt/dmrlink/ambe_audio has TG2 in
>>>         the filter.
>>>
>>>         Is there any other ports I need to set? It looks like most
>>>         things are set default.
>>>
>>>
>>>
>>>         _______________________________________________
>>>         Allstar-Digital mailing list
>>>         Allstar-Digital at lists.keekles.org
>>>         <mailto:Allstar-Digital at lists.keekles.org>
>>>         http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>         -- 
>>         "Anything is possible if you don't know what you are talking about."
>>         1st Law of Logic
>>
>>
>>         _______________________________________________
>>         Allstar-Digital mailing list
>>         Allstar-Digital at lists.keekles.org
>>         <mailto:Allstar-Digital at lists.keekles.org>
>>         http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>>
>>     _______________________________________________
>>     Allstar-Digital mailing list
>>     Allstar-Digital at lists.keekles.org
>>     <mailto:Allstar-Digital at lists.keekles.org>
>>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>     -- 
>     "Anything is possible if you don't know what you are talking about."
>     1st Law of Logic
>
>
>     _______________________________________________
>     Allstar-Digital mailing list
>     Allstar-Digital at lists.keekles.org
>     <mailto:Allstar-Digital at lists.keekles.org>
>     http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160129/cbbf491e/attachment.html>