[Allstar Digital] DMRGateway.ini

[Steve Zingman]

Yes, you can point a Pi at your bridge. Yes, you will need another 
DV3000. Yes, a cheap sound fob would work.

On 5/11/2016 11:51 AM, Robert Newberry wrote:
>
> I decided to change the subject to more accurately reflect what we're 
> talking about.
>
> I took a look at /etc/DMRGateway.ini. Currently my RPI2 and DV3000 
> reside at the site with the repeater. I'd like to set something like 
> this up at home. I have a few questions.
>
> Can I just get another pi and install DMRlink and DMRGateway and point 
> DMRGateway.ini to my remote site via IP?
>
> Or would I need to also have a DV3000 installed at home as well?
>
> I assume the cheap little USB fobs we use for ASL would be OK?
>
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
> www.radioguysrepeaternetwork.com <http://www.radioguysrepeaternetwork.com>
>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160511/e43b8c7f/attachment.html>