[Allstar Digital] DMRGateway.ini

[Mike Zingman]

Robert,

There is no advantage to what you have proposed.  ASL as input to
DMRGateway vs local microphone input to DMRGateway is the same.  So, just
use ASL to link your local node at home to the Pi at your repeater site.

Mike


On Wed, May 11, 2016 at 11:51 AM, Robert Newberry <N1XBM at amsat.org> wrote:

> I decided to change the subject to more accurately reflect what we're
> talking about.
>
> I took a look at /etc/DMRGateway.ini. Currently my RPI2 and DV3000 reside
> at the site with the repeater. I'd like to set something like this up at
> home. I have a few questions.
>
> Can I just get another pi and install DMRlink and DMRGateway and point
> DMRGateway.ini to my remote site via IP?
>
> Or would I need to also have a DV3000 installed at home as well?
>
> I assume the cheap little USB fobs we use for ASL would be OK?
>
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
> www.radioguysrepeaternetwork.com
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160511/ad0ca45a/attachment.html>