[Allstar Digital] Using AllStar DTMF to steer DMRGateway

[Mike Zingman]

The two dmrlink files are totally separate.  One controls your bridge rules
and the other controls ambe_audio.  The ambe_audio version should only
enable the network you want ambe_audio to connect to.  So, if you have a
[FOO] section in ambe_audio/dmrlink.cfg, you should also have one in
ambe_audio.cfg



On Wed, May 11, 2016 at 2:40 PM, Robert Newberry <N1XBM at amsat.org> wrote:

>  I figured the names were arbitrary. I was mostly wondering if I was going
> to have a conflict having a brandmeister connection defined in
> /opt/dmrlink/bridge/drmlink.cfg and /opt/dmrlink/ambe_audio/dmrlink.cfg
>
> On Wed, May 11, 2016 at 2:21 PM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> The names I posted are only a example. use anything you want.
>>
>>
>> On 5/11/2016 1:59 PM, Robert Newberry wrote:
>>
>> I get it kind of... I'm still a little confused.
>>
>> I currently have the named section defined as. I use TG 42657 as my ID to
>> access ASL.
>>
>> [AMBE_PEER]
>> gatewaydmrId = 312307
>> tgFilter = 42657
>> txTg = 42657
>> txTs = 2
>>
>> I put this right above what was already in the file so the next section is
>>
>> [BM]
>> tgFilter = 3100, 31094
>> txTg = 3100
>> txTx = 2
>>
>> So am I to assume that in my /opt/dmrlink/ambe_audio/dmrlink.cfg
>>
>> that I should ass a section for BM with the relevant connection
>> information? currently the only thing enabled is AMBE_PEER.
>>
>> Will this be an issue since I already have a connection to Brandmeister
>> already defined in /opt/dmrlink/bridge/dmrlink/cfg
>>
>> Thank you.
>>
>>
>>
>>
>>
>> On Wed, May 11, 2016 at 12:49 PM, Steve Zingman <szingman at msgstor.com>
>> wrote:
>>
>>> It's easy to steer your DMRGateway via DTMF or CLI or AllMon or
>>> AndroidIAX. Consider the following snip from ambe_audio.cfg
>>>
>>> section = BM                                    # Use BM section values
>>>
>>> # order of precedence: dmrlink.cfg, section=, DEFAULTS
>>>
>>> [BM]                                            # Listen to all, TX on
>>> TG3100 TS1
>>> tgFilter = 3100,3106,31094                      # A list of TG IDs to
>>> monitor.  All TGs will be passed to DMRGateway
>>> txTg = 3100                                     # TG to use for all
>>> frames received from DMRGateway -> IPSC
>>> txTs = 2                                        # Slot to use for frames
>>> received from DMRGateway -> IPSC
>>>
>>> [BM3100]                                        # Brandmeister
>>> tgFilter = 3100                                 # USA Nationwide
>>> txTg = 3100
>>> txTs = 1
>>>
>>> [BM3106]                                        # Brandmeister
>>> tgFilter = 3106                                 # California Statewide
>>> txTg = 3106
>>> txTs = 2
>>>
>>> [BM31094]                                       # Brandmeister
>>> tgFilter = 31094                                # US call area 4
>>> txTg = 31094
>>> txTs = 1
>>>
>>> [Sandbox]                                       # Sandbox network
>>> tgFilter = 3120
>>> txTg = 3120
>>> txTs = 2
>>>
>>> [LOCAL]                                         # Local network
>>> tgFilter = 3
>>> txTg = 3
>>> txTs = 2
>>>
>>> [Shutup]                                        # Be quiet
>>> tgFilter = 0
>>> txTg = 0
>>> txTs = 2
>>>
>>> /etc/asterisk/rpt.conf
>>>
>>> ; DMRGateway Commands
>>>
>>> 73 = cmd,/bin/bash -c 'echo -n "section=Shutup" | nc 127.0.0.1 31002'
>>> 74 = cmd,/bin/bash -c 'echo -n "section=BM" | nc 127.0.0.1 31002'
>>> 76 = cmd,/bin/bash -c 'echo -n "section=DMR-MARC" | nc 127.0.0.1 31002'
>>> 77 = cmd,/bin/bash -c 'echo -n "section=BM3100" | nc 127.0.0.1 31002'
>>> 78 = cmd,/bin/bash -c 'echo -n "section=BM3106" | nc 127.0.0.1 31002'
>>> 79 = cmd,/bin/bash -c 'echo -n "section=BM31094" | nc 127.0.0.1 31002'
>>>
>>> Issue a *73 from a radio (simplified for example) and ambe_audio will
>>> use the section [Shutup]
>>> Issue a *77 from a radio (simplified for example) and ambe_audio will
>>> use the section [BM3100]
>>> Replace radio with CLI or AllMon or AndroidIAX.
>>> Add a script to cron
>>> ...
>>>
>>> Available remote control commands:
>>> 'reread_subscribers'
>>> 'reread_config'
>>> 'txTg'
>>> 'txTs'
>>> 'section'
>>> 'gateway_dmr_id'
>>> 'gateway_peer_id'
>>> 'restart'
>>> 'playbackFromFile'
>>> 'tgs'
>>> 'dump_template'
>>> 'get_info'
>>>
>>> See:
>>> <https://github.com/N4IRS/DMRGateway/blob/master/DMRGatewayDiagram.pdf>
>>> <https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.rtf>
>>> <
>>> https://github.com/N4IRS/DMRGateway/blob/master/DMRGatewayTechOverview.pdf
>>> >
>>>
>>> For INAD, 73 Steve N4IRS
>>>
>>> --
>>> "Anything is possible if you don't know what you are talking about."
>>> 1st Law of Logic
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>
>>
>>
>> --
>> N1XBM
>> Apparare Scientor
>> Paratus Communicare
>> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>> www.radioguysrepeaternetwork.com
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>
>
> --
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
> www.radioguysrepeaternetwork.com
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160511/7b8eb171/attachment.html>