[Allstar Digital] DMRGateway Steering one way audio

Steve Zingman szingman at msgstor.com
Fri May 13 09:20:44 EDT 2016


Post /var/log/dmrlink/ambe_audio.log after you issue the section command

On 5/13/2016 9:12 AM, Robert Newberry wrote:
>
> So I had a look at things. All files refernced are in 
> /opt/dmrlink/ambe_audio
>
> So in dmrlink.cfg I have
> [AMBE_PEER]
> ENABLED: True
> RADIO_ID: 312107
> IP: 192.168.0.203
> PORT: 52345
> ALIVE_TIMER: 5
> MAX_MISSED: 20
> PEER_OPER: True
> IPSC_MODE: DIGITAL
> TS1_LINK: True
> TS2_LINK: True
> CSBK_CALL: False
> RCM: True
> CON_APP: True
> XNL_CALL: False
> XNL_MASTER: False
> DATA_CALL: True
> VOICE_CALL: True
> MASTER_PEER: False
> AUTH_ENABLED: True
> AUTH_KEY: A1B2C3
> MASTER_IP: 192.168.0.203
> MASTER_PORT: 50001
>
> I have in ambe_audio.cfg
> # DEFAULTS - General settings.  These values are
> #inherited in each subsequent section (defined by section value).
> [DEFAULTS]
> debug = False                                   # Debug output for 
> each VOICE frame
> outToFile = False                               # Write each AMBE 
> frame to a file called ambe.bin
> outToUDP = True                               # Send each AMBE frame 
> to the _sock object (turn on/off DMRGateway operation)
> gateway = 127.0.0.1                           # IP address of 
> DMRGateway app
> toGatewayPort = 31000                      # Port DMRGateway is 
> listening on for AMBE frames to decode
> remoteControlPort = 31002                  # Port that ambe_audio is 
> listening on for remote control commands
> fromGatewayPort = 31003                   # Port to listen on for AMBE 
> frames to transmit to all peers
> gatewayDmrId = 312307                      # id to use when 
> transmitting from the gateway
> tgFilter = 42657                                   # A list of TG IDs 
> to monitor.  All TGs will be passed to DMRGateway
> txTg = 42657                                      # TG to use for all 
> frames received from DMRGateway -> IPSC
> txTs = 2                                               # Slot to use 
> for frames received from DMRGateway -> IPSC
> #
> # The section setting defines the current section to use.  By default, 
> the ‘ENABLED’ section in dmrlink.cfg is used.
> # Any values in the named section override the values from the 
> DEFAULTS section.  For example, if the BM section
> # has a value for gatewayDmrId it would override the value above.  
> Only one section should be set here.  Think
> # of this as an easy way to switch between several different 
> configurations with a single line.
> #
> #section = BM                                   # Use BM section values
> #section = Sandbox                              # Use SANDBOX section 
> values
>
> [AMBE_PEER]
> gatewayDmrId = 312307
> tgFilter = 42657
> txTg = 42657
> txTs = 2
>
> [ME_SW]                                         # BrandMeister
> tgFilter = 3123                                  # A list of TG IDs to 
> monitor.  All TGs will be passed to DMRGateway
> txTg = 3123                                     # TG to use for all 
> frames received from DMRGateway -> IPSC
> txTs = 2                                          # Slot to use for 
> frames received from DMRGateway -> IPSC
>
> So AMBE_PEER works fine, I attempted to add ME_SW which only works one 
> way. The way I tested this is by using my dv4mini on 3123 attempting 
> to talk to my repeater. Audio passed from my dv4mini to my repeater, 
> but my repeater (from ASL) will not pass audio to the dv4mini. Also my 
> bridge is setup for 3123 and my local users on the repeater can use 
> 3123 for QSOs.
>
> I'm guessing part of my problem is I need to add ME_SW to dmrlink.cfg. 
> Although I'm confused about some of the settings such as using 
> duplicate information, such as ports and IDs.
>
> Thanks
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160513/5bd406b7/attachment.html>


More information about the Allstar-Digital mailing list