[Allstar Digital] DMRGateway Steering one way audio

Fri May 13 10:49:19 EDT 2016

[LOGGER]
LOG_FILE: /var/log/dmrlink/ambe_audio.log
LOG_HANDLERS: file
LOG_LEVEL: CRITICAL
LOG_NAME: DMRlink

I put 3123001 unber ambe_audio.cfg

[ME_SW]
gatewayDmrId = 3123001
tgFilter = 3123
txTg = 3123
txTs = 2

On Fri, May 13, 2016 at 10:43 AM, Steve Zingman <szingman at msgstor.com>
wrote:

> Show me the [LOGGER] section in /opt/dmrlink/ambe_audio/dmrlink.cfg
> Where did you put 3123001?
>
>
> On 5/13/2016 10:39 AM, Robert Newberry wrote:
>
> Steve, I got it working. I ended up using my ID 3123001. I just got done
> testing on BM and talking to someone on K0USY. On the last heard it shows
> up as me (N1XBM) and the source my repeater.
>
> I checked /var/log/dmrlink/ambe_audio.log and its blank?
>
> On Fri, May 13, 2016 at 9:20 AM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> Post /var/log/dmrlink/ambe_audio.log after you issue the section command
>>
>> On 5/13/2016 9:12 AM, Robert Newberry wrote:
>>
>>
>> So I had a look at things. All files refernced are in
>> /opt/dmrlink/ambe_audio
>>
>> So in dmrlink.cfg I have
>> [AMBE_PEER]
>> ENABLED: True
>> RADIO_ID: 312107
>> IP: 192.168.0.203
>> PORT: 52345
>> ALIVE_TIMER: 5
>> MAX_MISSED: 20
>> PEER_OPER: True
>> IPSC_MODE: DIGITAL
>> TS1_LINK: True
>> TS2_LINK: True
>> CSBK_CALL: False
>> RCM: True
>> CON_APP: True
>> XNL_CALL: False
>> XNL_MASTER: False
>> DATA_CALL: True
>> VOICE_CALL: True
>> MASTER_PEER: False
>> AUTH_ENABLED: True
>> AUTH_KEY: A1B2C3
>> MASTER_IP: 192.168.0.203
>> MASTER_PORT: 50001
>>
>> I have in ambe_audio.cfg
>> # DEFAULTS - General settings.  These values are
>> #inherited in each subsequent section (defined by section value).
>> [DEFAULTS]
>> debug = False                                   # Debug output for each
>> VOICE frame
>> outToFile = False                               # Write each AMBE frame
>> to a file called ambe.bin
>> outToUDP = True                               # Send each AMBE frame to
>> the _sock object (turn on/off DMRGateway operation)
>> gateway = 127.0.0.1                           # IP address of DMRGateway
>> app
>> toGatewayPort = 31000                      # Port DMRGateway is listening
>> on for AMBE frames to decode
>> remoteControlPort = 31002                  # Port that ambe_audio is
>> listening on for remote control commands
>> fromGatewayPort = 31003                   # Port to listen on for AMBE
>> frames to transmit to all peers
>> gatewayDmrId = 312307                      # id to use when transmitting
>> from the gateway
>> tgFilter = 42657                                   # A list of TG IDs to
>> monitor.  All TGs will be passed to DMRGateway
>> txTg = 42657                                      # TG to use for all
>> frames received from DMRGateway -> IPSC
>> txTs = 2                                               # Slot to use for
>> frames received from DMRGateway -> IPSC
>> #
>> # The section setting defines the current section to use.  By default,
>> the ‘ENABLED’ section in dmrlink.cfg is used.
>> # Any values in the named section override the values from the DEFAULTS
>> section.  For example, if the BM section
>> # has a value for gatewayDmrId it would override the value above.  Only
>> one section should be set here.  Think
>> # of this as an easy way to switch between several different
>> configurations with a single line.
>> #
>> #section = BM                                   # Use BM section values
>> #section = Sandbox                              # Use SANDBOX section
>> values
>>
>> [AMBE_PEER]
>> gatewayDmrId = 312307
>> tgFilter = 42657
>> txTg = 42657
>> txTs = 2
>>
>> [ME_SW]                                         # BrandMeister
>> tgFilter = 3123                                  # A list of TG IDs to
>> monitor.  All TGs will be passed to DMRGateway
>> txTg = 3123                                     # TG to use for all
>> frames received from DMRGateway -> IPSC
>> txTs = 2                                          # Slot to use for
>> frames received from DMRGateway -> IPSC
>>
>> So AMBE_PEER works fine, I attempted to add ME_SW which only works one
>> way. The way I tested this is by using my dv4mini on 3123 attempting to
>> talk to my repeater. Audio passed from my dv4mini to my repeater, but my
>> repeater (from ASL) will not pass audio to the dv4mini. Also my bridge is
>> setup for 3123 and my local users on the repeater can use 3123 for QSOs.
>>
>> I'm guessing part of my problem is I need to add ME_SW to dmrlink.cfg.
>> Although I'm confused about some of the settings such as using duplicate
>> information, such as ports and IDs.
>>
>> Thanks
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>
>
> --
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
> www.radioguysrepeaternetwork.com
>
>
> _______________________________________________
> Allstar-Digital mailing listAllstar-Digital at lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>

-- 
N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
www.radioguysrepeaternetwork.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160513/86b795ce/attachment.html>