[Allstar Digital] DMRGateway Steering one way audio
Steve Zingman
szingman at msgstor.com
Fri May 13 10:57:01 EDT 2016
You might want to change LOG_LEVEL to INFO or WARNING to get some
information into the log. at least when debugging.
On 5/13/2016 10:49 AM, Robert Newberry wrote:
> [LOGGER]
> LOG_FILE: /var/log/dmrlink/ambe_audio.log
> LOG_HANDLERS: file
> LOG_LEVEL: CRITICAL
> LOG_NAME: DMRlink
>
> I put 3123001 unber ambe_audio.cfg
>
>
> [ME_SW]
> gatewayDmrId = 3123001
> tgFilter = 3123
> txTg = 3123
> txTs = 2
>
> On Fri, May 13, 2016 at 10:43 AM, Steve Zingman <szingman at msgstor.com
> <mailto:szingman at msgstor.com>> wrote:
>
> Show me the [LOGGER] section in /opt/dmrlink/ambe_audio/dmrlink.cfg
> Where did you put 3123001?
>
>
> On 5/13/2016 10:39 AM, Robert Newberry wrote:
>> Steve, I got it working. I ended up using my ID 3123001. I just
>> got done testing on BM and talking to someone on K0USY. On the
>> last heard it shows up as me (N1XBM) and the source my repeater.
>>
>> I checked /var/log/dmrlink/ambe_audio.log and its blank?
>>
>> On Fri, May 13, 2016 at 9:20 AM, Steve Zingman
>> <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>
>> Post /var/log/dmrlink/ambe_audio.log after you issue the
>> section command
>>
>> On 5/13/2016 9:12 AM, Robert Newberry wrote:
>>>
>>> So I had a look at things. All files refernced are in
>>> /opt/dmrlink/ambe_audio
>>>
>>> So in dmrlink.cfg I have
>>> [AMBE_PEER]
>>> ENABLED: True
>>> RADIO_ID: 312107
>>> IP: 192.168.0.203
>>> PORT: 52345
>>> ALIVE_TIMER: 5
>>> MAX_MISSED: 20
>>> PEER_OPER: True
>>> IPSC_MODE: DIGITAL
>>> TS1_LINK: True
>>> TS2_LINK: True
>>> CSBK_CALL: False
>>> RCM: True
>>> CON_APP: True
>>> XNL_CALL: False
>>> XNL_MASTER: False
>>> DATA_CALL: True
>>> VOICE_CALL: True
>>> MASTER_PEER: False
>>> AUTH_ENABLED: True
>>> AUTH_KEY: A1B2C3
>>> MASTER_IP: 192.168.0.203
>>> MASTER_PORT: 50001
>>>
>>> I have in ambe_audio.cfg
>>> # DEFAULTS - General settings. These values are
>>> #inherited in each subsequent section (defined by section
>>> value).
>>> [DEFAULTS]
>>> debug = False # Debug output for each VOICE frame
>>> outToFile = False # Write each AMBE frame to a file called
>>> ambe.bin
>>> outToUDP = True # Send each
>>> AMBE frame to the _sock object (turn on/off DMRGateway
>>> operation)
>>> gateway = 127.0.0.1 # IP address of DMRGateway app
>>> toGatewayPort = 31000 # Port DMRGateway
>>> is listening on for AMBE frames to decode
>>> remoteControlPort = 31002 # Port that
>>> ambe_audio is listening on for remote control commands
>>> fromGatewayPort = 31003 # Port to listen
>>> on for AMBE frames to transmit to all peers
>>> gatewayDmrId = 312307 # id to use when
>>> transmitting from the gateway
>>> tgFilter = 42657 # A list of TG IDs to monitor. All TGs
>>> will be passed to DMRGateway
>>> txTg = 42657 # TG to use for all frames received from
>>> DMRGateway -> IPSC
>>> txTs = 2 # Slot to use for frames received from
>>> DMRGateway -> IPSC
>>> #
>>> # The section setting defines the current section to use.
>>> By default, the ‘ENABLED’ section in dmrlink.cfg is used.
>>> # Any values in the named section override the values from
>>> the DEFAULTS section. For example, if the BM section
>>> # has a value for gatewayDmrId it would override the value
>>> above. Only one section should be set here. Think
>>> # of this as an easy way to switch between several different
>>> configurations with a single line.
>>> #
>>> #section = BM # Use BM section values
>>> #section = Sandbox # Use SANDBOX section values
>>>
>>> [AMBE_PEER]
>>> gatewayDmrId = 312307
>>> tgFilter = 42657
>>> txTg = 42657
>>> txTs = 2
>>>
>>> [ME_SW] # BrandMeister
>>> tgFilter = 3123 # A list of TG IDs to monitor. All TGs will
>>> be passed to DMRGateway
>>> txTg = 3123 # TG to use for all frames received from
>>> DMRGateway -> IPSC
>>> txTs = 2 # Slot to use for frames received from DMRGateway
>>> -> IPSC
>>>
>>> So AMBE_PEER works fine, I attempted to add ME_SW which only
>>> works one way. The way I tested this is by using my dv4mini
>>> on 3123 attempting to talk to my repeater. Audio passed from
>>> my dv4mini to my repeater, but my repeater (from ASL) will
>>> not pass audio to the dv4mini. Also my bridge is setup for
>>> 3123 and my local users on the repeater can use 3123 for QSOs.
>>>
>>> I'm guessing part of my problem is I need to add ME_SW to
>>> dmrlink.cfg. Although I'm confused about some of the
>>> settings such as using duplicate information, such as ports
>>> and IDs.
>>>
>>> Thanks
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> <mailto:Allstar-Digital at lists.keekles.org>
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> <mailto:Allstar-Digital at lists.keekles.org>
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>>
>>
>> --
>> N1XBM
>> Apparare Scientor
>> Paratus Communicare
>> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>> www.radioguysrepeaternetwork.com
>> <http://www.radioguysrepeaternetwork.com>
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> <mailto:Allstar-Digital at lists.keekles.org>
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> <mailto:Allstar-Digital at lists.keekles.org>
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
>
> --
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
> www.radioguysrepeaternetwork.com <http://www.radioguysrepeaternetwork.com>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160513/cbe04029/attachment.html>
More information about the Allstar-Digital
mailing list