[Allstar Digital] DMRGateway Steering one way audio
Steve Zingman
szingman at msgstor.com
Fri May 13 11:09:42 EDT 2016
No,
All analog traffic through the gateway will look like it's coming from
you. ASL ---> DMR
On 5/13/2016 11:08 AM, Robert Newberry wrote:
> OK Steve, thank you. This will be an excellent addition to my network.
> Is there problem with me using 3123001 for gatewayDmrId?
>
> On Fri, May 13, 2016 at 10:57 AM, Steve Zingman <szingman at msgstor.com
> <mailto:szingman at msgstor.com>> wrote:
>
> You might want to change LOG_LEVEL to INFO or WARNING to get some
> information into the log. at least when debugging.
>
> On 5/13/2016 10:49 AM, Robert Newberry wrote:
>> [LOGGER]
>> LOG_FILE: /var/log/dmrlink/ambe_audio.log
>> LOG_HANDLERS: file
>> LOG_LEVEL: CRITICAL
>> LOG_NAME: DMRlink
>>
>> I put 3123001 unber ambe_audio.cfg
>>
>>
>> [ME_SW]
>> gatewayDmrId = 3123001
>> tgFilter = 3123
>> txTg = 3123
>> txTs = 2
>>
>> On Fri, May 13, 2016 at 10:43 AM, Steve Zingman
>> <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>
>> Show me the [LOGGER] section in
>> /opt/dmrlink/ambe_audio/dmrlink.cfg
>> Where did you put 3123001?
>>
>>
>> On 5/13/2016 10:39 AM, Robert Newberry wrote:
>>> Steve, I got it working. I ended up using my ID 3123001. I
>>> just got done testing on BM and talking to someone on K0USY.
>>> On the last heard it shows up as me (N1XBM) and the source
>>> my repeater.
>>>
>>> I checked /var/log/dmrlink/ambe_audio.log and its blank?
>>>
>>> On Fri, May 13, 2016 at 9:20 AM, Steve Zingman
>>> <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>>
>>> Post /var/log/dmrlink/ambe_audio.log after you issue the
>>> section command
>>>
>>> On 5/13/2016 9:12 AM, Robert Newberry wrote:
>>>>
>>>> So I had a look at things. All files refernced are in
>>>> /opt/dmrlink/ambe_audio
>>>>
>>>> So in dmrlink.cfg I have
>>>> [AMBE_PEER]
>>>> ENABLED: True
>>>> RADIO_ID: 312107
>>>> IP: 192.168.0.203
>>>> PORT: 52345
>>>> ALIVE_TIMER: 5
>>>> MAX_MISSED: 20
>>>> PEER_OPER: True
>>>> IPSC_MODE: DIGITAL
>>>> TS1_LINK: True
>>>> TS2_LINK: True
>>>> CSBK_CALL: False
>>>> RCM: True
>>>> CON_APP: True
>>>> XNL_CALL: False
>>>> XNL_MASTER: False
>>>> DATA_CALL: True
>>>> VOICE_CALL: True
>>>> MASTER_PEER: False
>>>> AUTH_ENABLED: True
>>>> AUTH_KEY: A1B2C3
>>>> MASTER_IP: 192.168.0.203
>>>> MASTER_PORT: 50001
>>>>
>>>> I have in ambe_audio.cfg
>>>> # DEFAULTS - General settings. These values are
>>>> #inherited in each subsequent section (defined by
>>>> section value).
>>>> [DEFAULTS]
>>>> debug = False # Debug output for each VOICE frame
>>>> outToFile = False # Write each AMBE frame to a file
>>>> called ambe.bin
>>>> outToUDP = True # Send each AMBE frame to the _sock
>>>> object (turn on/off DMRGateway operation)
>>>> gateway = 127.0.0.1 # IP address of DMRGateway app
>>>> toGatewayPort = 31000 # Port DMRGateway is listening on
>>>> for AMBE frames to decode
>>>> remoteControlPort = 31002 # Port that ambe_audio is
>>>> listening on for remote control commands
>>>> fromGatewayPort = 31003 # Port to listen on for AMBE
>>>> frames to transmit to all peers
>>>> gatewayDmrId = 312307 # id to use when transmitting
>>>> from the gateway
>>>> tgFilter = 42657 # A list of TG IDs to monitor. All
>>>> TGs will be passed to DMRGateway
>>>> txTg = 42657 # TG to use for all frames received
>>>> from DMRGateway -> IPSC
>>>> txTs = 2 # Slot to use for frames received from
>>>> DMRGateway -> IPSC
>>>> #
>>>> # The section setting defines the current section to
>>>> use. By default, the ‘ENABLED’ section in dmrlink.cfg
>>>> is used.
>>>> # Any values in the named section override the values
>>>> from the DEFAULTS section. For example, if the BM section
>>>> # has a value for gatewayDmrId it would override the
>>>> value above. Only one section should be set here. Think
>>>> # of this as an easy way to switch between several
>>>> different configurations with a single line.
>>>> #
>>>> #section = BM # Use BM section values
>>>> #section = Sandbox # Use SANDBOX section values
>>>>
>>>> [AMBE_PEER]
>>>> gatewayDmrId = 312307
>>>> tgFilter = 42657
>>>> txTg = 42657
>>>> txTs = 2
>>>>
>>>> [ME_SW] # BrandMeister
>>>> tgFilter = 3123 # A list of TG IDs to monitor. All TGs
>>>> will be passed to DMRGateway
>>>> txTg = 3123 # TG to use for all frames received from
>>>> DMRGateway -> IPSC
>>>> txTs = 2 # Slot to use for frames received from
>>>> DMRGateway -> IPSC
>>>>
>>>> So AMBE_PEER works fine, I attempted to add ME_SW which
>>>> only works one way. The way I tested this is by using
>>>> my dv4mini on 3123 attempting to talk to my repeater.
>>>> Audio passed from my dv4mini to my repeater, but my
>>>> repeater (from ASL) will not pass audio to the dv4mini.
>>>> Also my bridge is setup for 3123 and my local users on
>>>> the repeater can use 3123 for QSOs.
>>>>
>>>> I'm guessing part of my problem is I need to add ME_SW
>>>> to dmrlink.cfg. Although I'm confused about some of the
>>>> settings such as using duplicate information, such as
>>>> ports and IDs.
>>>>
>>>> Thanks
>>>>
>>>>
>>>> _______________________________________________
>>>> Allstar-Digital mailing list
>>>> Allstar-Digital at lists.keekles.org
>>>> <mailto:Allstar-Digital at lists.keekles.org>
>>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>> --
>>> "Anything is possible if you don't know what you are talking about."
>>> 1st Law of Logic
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> <mailto:Allstar-Digital at lists.keekles.org>
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>>
>>>
>>>
>>>
>>> --
>>> N1XBM
>>> Apparare Scientor
>>> Paratus Communicare
>>> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>>> www.radioguysrepeaternetwork.com
>>> <http://www.radioguysrepeaternetwork.com>
>>>
>>>
>>> _______________________________________________
>>> Allstar-Digital mailing list
>>> Allstar-Digital at lists.keekles.org
>>> <mailto:Allstar-Digital at lists.keekles.org>
>>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> <mailto:Allstar-Digital at lists.keekles.org>
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>>
>>
>>
>>
>> --
>> N1XBM
>> Apparare Scientor
>> Paratus Communicare
>> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
>> www.radioguysrepeaternetwork.com
>> <http://www.radioguysrepeaternetwork.com>
>>
>>
>> _______________________________________________
>> Allstar-Digital mailing list
>> Allstar-Digital at lists.keekles.org
>> <mailto:Allstar-Digital at lists.keekles.org>
>> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> <mailto:Allstar-Digital at lists.keekles.org>
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
>
>
>
>
> --
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
> www.radioguysrepeaternetwork.com <http://www.radioguysrepeaternetwork.com>
>
>
> _______________________________________________
> Allstar-Digital mailing list
> Allstar-Digital at lists.keekles.org
> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/allstar-digital/attachments/20160513/f74019f8/attachment.html>
More information about the Allstar-Digital
mailing list